Re: [CAD_CAM_EDM_DRO] Re: Agilent Encoder Pull-up resistor

I agree, software only tuning is a bad idea, especially if the tuning
uses the same lines as the step/direction signals. However Rutex still
sell the older R9xH series which have pots to set the tuning. I am
running two on my lathe with single ended encoders and quite long
cables. They work well.

Les

>
> You should download their servo tuning instructions and then pretend
> you are a normal home shop CNC person and see if it makes sense. Then
> get the drives in a design where they don't provide the tuning pinouts
> to the DB25 and the fun really increases. If you buy a drive from
> Rutex it comes in "raw" and the defaults are not even close. My
> customer had to send his Rutex back to the machine manufacturer to get
> it "tuned" so it would work. Sometimes more complex is not better!
>
>
>
>
>