CAD CAM EDM DRO - Yahoo Group Archive

Re: Digitizing arm?

Posted by Don C
on 2006-09-21 17:39:18 UTC
True the error is cumulative but if the error is low enough then its
ok or you could have a program look at the date and if something is
radically different then its disregarded.



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Graham Stabler" <eexgs@...>
wrote:
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Don C" <tekno62@> wrote:
> >
> >
> > Im on the CNC zone also. so have been reading, from what I have been
> > looking at today and if I have done my math right the 5k encoders
> > that I have would be .072 deg per tick. With an arm of 3 feet (6
> foot radius)that breaks down to about .04" per tick.
>
> The error is cumulative, you will have probably 5 encoders and 5
errors.
>
> >My main problem is getting the
> > data from the encoders to the computer. I found a site that talks
> > about using a pic chip as the interface. then I have to see if I can
> > get the 3 - 4 encoders in via USB.
>
> Could have been my page. It is DIYable if you have the time and
> motivation, there is some code on my page but it is not tested.
>
> Graham
>

Discussion Thread

Don C 2006-09-21 10:15:23 UTC Digitizing arm? R Rogers 2006-09-21 10:58:12 UTC Re: [CAD_CAM_EDM_DRO] Digitizing arm? Don C 2006-09-21 11:11:28 UTC Re: Digitizing arm? Graham Stabler 2006-09-21 14:50:21 UTC Re: Digitizing arm? Don C 2006-09-21 15:43:23 UTC Re: Digitizing arm? R Rogers 2006-09-21 16:01:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing arm? Graham Stabler 2006-09-21 16:38:40 UTC Re: Digitizing arm? Graham Stabler 2006-09-21 16:40:59 UTC Re: Digitizing arm? R Rogers 2006-09-21 17:18:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing arm? Don C 2006-09-21 17:39:18 UTC Re: Digitizing arm? Graham Stabler 2006-09-22 03:13:42 UTC Re: Digitizing arm? Graham Stabler 2006-09-22 03:17:03 UTC Re: Digitizing arm? Graham Stabler 2006-09-22 03:20:43 UTC Re: Digitizing arm? protman16 2006-09-22 07:24:46 UTC Re: Digitizing arm? R Rogers 2006-09-22 07:48:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing arm? Jack Coats 2006-09-22 08:50:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing arm? David Speck 2006-09-22 10:22:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing arm? protman16 2006-09-22 13:37:17 UTC Re: Digitizing arm? Mark Vaughan 2006-09-22 16:13:27 UTC RE: [CAD_CAM_EDM_DRO] Re: Digitizing arm? art 2006-09-23 07:17:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Digitizing arm? Don C 2006-09-23 13:03:52 UTC Re: Digitizing arm? rawadkins 2006-09-23 13:14:52 UTC Re: Digitizing arm?