Re: [CAD_CAM_EDM_DRO] Dead encoder???
Posted by
Marcus
on 2006-10-14 20:12:48 UTC
Hi Jon:
Well, I did some testing today, and found...nothing!!
I was hoping to pin down which axis might be faulty, so I ran the machine
with a loop cycle so only one axis was moving at a time.
I ran each axis for over three hours with no faults whatsoever.
The machine ran continuously for nine hours with no hiccups.
More testing on Monday.
Cheers
Marcus
Well, I did some testing today, and found...nothing!!
I was hoping to pin down which axis might be faulty, so I ran the machine
with a loop cycle so only one axis was moving at a time.
I ran each axis for over three hours with no faults whatsoever.
The machine ran continuously for nine hours with no hiccups.
More testing on Monday.
Cheers
Marcus
Discussion Thread
Marcus
2006-10-12 19:46:04 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Jon Elson
2006-10-12 22:21:06 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Harko Schwartz
2006-10-13 03:40:59 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Marcus
2006-10-13 08:10:24 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Marcus
2006-10-13 08:20:01 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Jon Elson
2006-10-13 16:07:06 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Harko Schwartz
2006-10-13 19:07:47 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Marcus
2006-10-14 10:04:43 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Mark Vaughan
2006-10-14 13:15:33 UTC
RE: [CAD_CAM_EDM_DRO] Dead encoder???
Jon Elson
2006-10-14 13:31:34 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Marcus
2006-10-14 20:12:48 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Jon Elson
2006-10-14 21:09:41 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Marcus
2006-10-14 22:27:51 UTC
Re: [CAD_CAM_EDM_DRO] Dead encoder???
Mark Vaughan
2006-10-15 02:14:09 UTC
RE: [CAD_CAM_EDM_DRO] Dead encoder???