Re: RE: [CAD_CAM_EDM_DRO] Power Supply Box's
Posted by
H & J Johnson
on 2006-11-29 07:03:26 UTC
Thanks Mark, I will give it a whirl and see how I make out. I think I'll take extra care to add partitions as needed to keep the RF down. I'd also planned to put a cooling channel on the back which has cool air inside it, then where ever I need more air just put a vent and fan to bring it in. I also plan on filtering all the air that goes into the box and keep it sorta like a positive pressure box just by having several fans pushing filtered air into it at all times.
On another front..
Anyone ever piggy-backed a couple of 1500KVA UPS's together to keep a 220v supply running? Is it possible to do or a waste of time? I'm hoping to just use it to keep the power blip's from ruining a part, if the power did go down, it only needs to run the machine for about 1 minute while the program is stopped and the control computer shuts down. Is there a better way? I'd like to avoid paying $1500 for a solution if possible.
Jarrett
On another front..
Anyone ever piggy-backed a couple of 1500KVA UPS's together to keep a 220v supply running? Is it possible to do or a waste of time? I'm hoping to just use it to keep the power blip's from ruining a part, if the power did go down, it only needs to run the machine for about 1 minute while the program is stopped and the control computer shuts down. Is there a better way? I'd like to avoid paying $1500 for a solution if possible.
Jarrett
----- Original Message -----
From: Mark Vaughan <mark@...>
Date: Wednesday, November 29, 2006 7:18 am
Subject: RE: [CAD_CAM_EDM_DRO] Power Supply Box's
> The biggest problem will be noise.
>
> I keep my spindle 7HP VFD mounted on the wall behind the machine,
> it also
> gets a nice cool air supply.
>
> I have a small 1/5 hp VFD inside my main cabinet for suds pump
> (it's three
> phase, I have single phase, and gives me suds pump speed control)
>
> The G100 doesn't like it's network cable to run within 9 inch of
> my big VFD
> motor cable, though a screened network lead seems OK.
>
> Servo cards and motor leads are also very noisy and will need to
> be kept
> away from the G100 and it's input/output wires.
>
> Also keep an eye on temperature.
>
>
>
> Big commercial machines are all in one box, but that box is
> normally very
> big to keep things away from each other, and to get enough air in.
>
>
>
> Many people have successfully integrated it all into one cabinet, and
> there's no reason why you shouldn't but debugging may take a while
> longer.
> Anyhow that's some thoughts to get you going
>
>
>
> Regs Mark
>
> _____
>
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Jarrett & Heidi
> Johnson
> Sent: 29 November 2006 01:18
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Power Supply Box's
>
>
>
> What is the implications of building a power supply and computer
> box
> together?
>
> I've been tossing around the idea of building a dedicated power
> supply box which not only houses the power supply but has the
> needed VFD,
> G100, drives and spindle control interface card [ Digispeed?] as
> well as
> any other little relay's etc. In addition to this I'd like to
> mount my
> computer components right into this same box, MoBo, Drives, Video
> card and
> have a touch screen and industrial keyboard. Is having all of this
> in 1
> control box asking for problems? Should I be segregating the
> computer
> components from the rest of the power supplies and VFD [ partition
> the box
> to help eliminate RF and other gremlins into the works]? I'd
> beening
> thinking about just buying a bare bones kit from TigerDirect.ca
> [or the
> like] and using the guts outta it, not the case [well maybe switch
> out my
> old plane Jane case on my home comp. for the new one if it was fancy].
>
> Crazy?
>
> Jarrett Johnson
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
> be a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
Discussion Thread
Jarrett & Heidi Johnson
2006-11-28 17:24:05 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply Box's
Darren Lucke
2006-11-28 22:59:55 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply Box's
H & J Johnson
2006-11-29 05:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply Box's
Mark Vaughan
2006-11-29 05:54:38 UTC
RE: [CAD_CAM_EDM_DRO] Power Supply Box's
Darren Lucke
2006-11-29 06:00:00 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply Box's
H & J Johnson
2006-11-29 06:52:31 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply Box's
H & J Johnson
2006-11-29 07:03:26 UTC
Re: RE: [CAD_CAM_EDM_DRO] Power Supply Box's
Darren Lucke
2006-11-29 07:19:47 UTC
Re: [CAD_CAM_EDM_DRO] Power Supply Box's
caudlet
2006-12-02 07:11:22 UTC
Re: Power Supply Box's
Jarrett & Heidi Johnson
2006-12-02 16:31:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply Box's
Paul Alciatore
2006-12-06 20:19:31 UTC
Re: Power Supply Box's
Jarrett & Heidi Johnson
2006-12-06 20:49:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Power Supply Box's
Seiman H
2006-12-09 11:20:37 UTC
Looking for rack & pinion supplier
Jarrett & Heidi Johnson
2006-12-09 13:07:00 UTC
Re: [CAD_CAM_EDM_DRO] Looking for rack & pinion supplier
Seiman H
2006-12-10 14:01:44 UTC
Re: [CAD_CAM_EDM_DRO] Looking for rack & pinion supplier