Re: [CAD_CAM_EDM_DRO] Power Supply Box's

Jarrett,
OH, now You've DONE IT! The invite will be taken..
let me know off list - not sure exactly when but
definitely would like to see that machine and others
you have.

Straight North of the border about 20-30 miles would
only be hour and a half away. I'm in Minot, ND (hour
from border).

Do you have pics of your machine? I'll convince my
buddy to come along.
Darren Lucke (oneluckeboy - at - yahoo.com)


--- H & J Johnson <hjjohnson@...> wrote:

> Darren, well come on up! :-) I'm almost straight
> north of you, just over the boarder by 20-30
> miles... [ About 4-5 hrs from you probably] You
> could put 50 miles on your self in 1 hour right
> now... just point it in any direction and pin it..
> :-)
>
> My Machine is 20' x 10' w/ a 4' Z axis. We've got a
> mobile control box on our lathe at work and man is
> that sweet, you can pull it out of the way when
> loading something into the machine or move way down
> to the other end when setting the live center on
> something long.. it has a pendant as well but the
> combination of the two options sure makes it nice.
>
> Jarrett

____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com