CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNC drilling

Posted by HTCLKI@A...
on 2006-12-15 11:00:58 UTC
EASY RULE OF THUMB

FOR C.R.S. 1020

DRILL SPEED 1/2 IN DIA DRILL = .500 RUN AT 500RPM

THEN 1/2 THE SIZE RUNS TWICE AS FAST OR 1/4 DIA AT 1000 RPM
THEN 1/2 THAT SIZE RUNS TWICE AS FAST OR 1/8 DIA AT 2000 RPM
AND SO ON

THE SAME WAY WITH LARGER DRILLS
THEN TWICE THE SIZE RUNS HALF AS FAST
AND SO ON

CHIP LOAD SHOULD BE .005 PER FLUTE ON I/2 DIA DRILL
GREATER ON LARGER DRILL AND LESS ON SMALLER DRILL

I SAID THIS WAS A RULE OF THUMB NO MORE


[Non-text portions of this message have been removed]

Discussion Thread

Ron Ginger 2006-12-15 05:41:01 UTC CNC drilling Phil Mattison 2006-12-15 07:03:11 UTC re: CNC drilling R Rogers 2006-12-15 08:26:08 UTC Re: [CAD_CAM_EDM_DRO] CNC drilling Vince Endter 2006-12-15 08:35:57 UTC Re: CNC drilling Tom Hubin 2006-12-15 08:40:28 UTC Re: [CAD_CAM_EDM_DRO] CNC drilling Tom Hubin 2006-12-15 09:08:09 UTC Re: [CAD_CAM_EDM_DRO] CNC drilling Ken Campbell 2006-12-15 09:34:54 UTC Re: [CAD_CAM_EDM_DRO] CNC drilling HTCLKI@A... 2006-12-15 11:00:58 UTC Re: [CAD_CAM_EDM_DRO] CNC drilling stcnc2000 2006-12-15 19:36:37 UTC Re: CNC drilling turbulatordude 2006-12-15 22:15:31 UTC Re: CNC drilling Fred Smith 2006-12-18 06:29:38 UTC Re: CNC drilling turbulatordude 2006-12-18 09:05:03 UTC Re: CNC drilling