CAD CAM EDM DRO - Yahoo Group Archive

Re: 6 axis ARCNC100 CNC board with constant contouring turned on

Posted by atelierrobin
on 2006-12-15 10:13:15 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Lester Caine <lester@...> wrote:
>
> atelierrobin wrote:
>
> > keyboard, NTSC video screen (standard TV) and various user supplied
> PAL option later?
> Or RGB for any monitor?
>

Pal yes, it requires no hardware mods. Just a firmware modification
that we will do once we get our hads on a PAL monitor to test. Also
not sure if this is correct but we were told that most TVs/videos
monitors sold in Europe are NTSC/PAL compatible. Maybe someone can
confirm?

RGB, no plan yet.

Patrick Robin
http://www.atelierrobin.net
ARCNC100

Discussion Thread

atelierrobin 2006-12-13 12:43:16 UTC 6 axis ARCNC100 CNC board with constant contouring turned on lcdpublishing 2006-12-13 14:14:36 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-13 18:17:11 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on lcdpublishing 2006-12-14 05:36:58 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on Vince Endter 2006-12-14 06:21:44 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-14 07:56:53 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-14 08:07:48 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on optics22000 2006-12-15 08:43:30 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-15 09:14:47 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on Lester Caine 2006-12-15 09:50:23 UTC Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-15 10:13:15 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on Dave Fisher 2006-12-15 11:06:53 UTC RE: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on Lester Caine 2006-12-15 11:20:46 UTC Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-15 11:56:10 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on optics22000 2006-12-16 17:27:40 UTC NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-17 09:25:34 UTC NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on Lester Caine 2006-12-17 11:29:58 UTC Re: [CAD_CAM_EDM_DRO] NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on Mark Vaughan 2006-12-17 12:10:38 UTC RE: [CAD_CAM_EDM_DRO] NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on