CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] digital protractor for faceting machine

on 2007-03-03 18:43:06 UTC
>I am a new member here and am trying to find information of how to
>build a digital protractor for a faceting machine. Had information
>form a site that used a carbon trim pot, but the site has gone black.
>from a search of this site I also see information on rotary encoders.

How fine do you want it to be? The easy way is to buy a 360 line
encoder and do 4 count quadrature multiplication on the outputs which
will give you a 15 minute resolution. Of course you could build a
129,600 line pair unit with 4 count quadrature multiplication on the
outputs and get 1 second of resolution. It isn't ever cheap!

Most find that a worm setup with a cheaper encoder is a good
compromise. A 36:1 worm drive is not hard to do, that means that
each turn of the worm is 10 degrees on the gear. A 600 line encoder
gives 1/4 minute (15 seconds) resolution, a 3,600 line encoder gives
1/4 second. I would bet that you don't need more than 1 second
resolution (about 1" at 100 yards.)


David G. LeVine
Nashua, NH 03060


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.6/709 - Release Date: 3/3/2007 8:12 AM

Discussion Thread

ol3_m3 2007-03-03 11:55:41 UTC digital protractor for faceting machine David G. LeVine 2007-03-03 18:43:06 UTC Re: [CAD_CAM_EDM_DRO] digital protractor for faceting machine ol3_m3 2007-03-03 21:16:35 UTC Re: digital protractor for faceting machine BRIAN FOLEY 2007-03-04 03:21:39 UTC Re: [CAD_CAM_EDM_DRO] digital protractor for faceting machine Mark Vaughan 2007-03-04 05:13:03 UTC RE: [CAD_CAM_EDM_DRO] digital protractor for faceting machine Landrum Haddix 2007-03-04 07:35:27 UTC Re: [CAD_CAM_EDM_DRO] digital protractor for faceting machine ol3_m3 2007-03-04 08:00:37 UTC Re: digital protractor for faceting machine Michael Edgett 2007-03-04 11:45:21 UTC Re: digital protractor for faceting machine David G. LeVine 2007-03-04 11:57:14 UTC [CAD_CAM_EDM_DRO] Re: digital protractor for faceting machine G L Travis 2007-03-04 12:00:19 UTC Re: digital protractor for faceting machine Landrum Haddix 2007-03-04 15:59:50 UTC Re: [CAD_CAM_EDM_DRO] Re: digital protractor for faceting machine Billy Stringfellow 2007-03-05 10:21:31 UTC Re:digital protractor for faceting machine David G. LeVine 2007-03-05 22:37:25 UTC Re: [CAD_CAM_EDM_DRO] Re:digital protractor for faceting machine Rexarino 2007-03-06 00:52:52 UTC Re: [CAD_CAM_EDM_DRO] Re:digital protractor for faceting machine