RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Posted by
Andy Wander
on 2007-03-09 12:12:13 UTC
Brian:
My impression ids that Jon is a pretty smart guy, and if he says it
works, I would believe it.
Besides, what have you got to lose?
______________________________________
Andy Wander
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of electromodeler
Sent: Friday, March 09, 2007 2:31 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Hi group, I came across this page while browsing about. Seems do-able
on a small budget, but are the electronics sound? It seems too simple.
Perhaps someone with a bit more knowledge can check it out? web page
is http://www.pico-systems.com/edm.html
regards,
Brian
This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex
My impression ids that Jon is a pretty smart guy, and if he says it
works, I would believe it.
Besides, what have you got to lose?
______________________________________
Andy Wander
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of electromodeler
Sent: Friday, March 09, 2007 2:31 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Hi group, I came across this page while browsing about. Seems do-able
on a small budget, but are the electronics sound? It seems too simple.
Perhaps someone with a bit more knowledge can check it out? web page
is http://www.pico-systems.com/edm.html
regards,
Brian
This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex
Discussion Thread
electromodeler
2007-03-09 11:33:49 UTC
cheap edm tap buster?
Andy Wander
2007-03-09 12:12:13 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Jon Elson
2007-03-09 19:29:48 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
turbulatordude
2007-03-09 21:03:12 UTC
Re: cheap edm tap buster?
Brian Worth
2007-03-10 00:03:36 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Mark Vaughan
2007-03-10 10:01:31 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Jon Elson
2007-03-10 21:29:17 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Mark Vaughan
2007-03-11 00:57:59 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Paul Kelly
2007-03-11 01:22:15 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
caudlet
2007-03-11 09:31:18 UTC
Re: cheap edm tap buster?
Steve Blackmore
2007-03-11 13:42:17 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
turbulatordude
2007-03-11 16:39:16 UTC
Re: cheap edm tap buster?
Steve Blackmore
2007-03-11 18:36:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: cheap edm tap buster?
turbulatordude
2007-03-11 18:54:03 UTC
Re: cheap edm tap buster?
Jon Elson
2007-03-11 20:50:11 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Mark Vaughan
2007-03-11 22:21:12 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
turbulatordude
2007-03-12 05:00:02 UTC
Re: cheap edm tap buster?
Jon Elson
2007-03-12 09:31:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: cheap edm tap buster?