CAD CAM EDM DRO - Yahoo Group Archive

Re: cheap edm tap buster?

on 2007-03-11 16:39:16 UTC
>
> Hi Jon - I've an old commercial Watton Electronics "Arc-out" tap
> buster that uses a vibrator coil (solenoid)
> to peck the electrode up and down.
> It only outputs 12-15V DC and runs fine using plain
> old tap water, as per the manual.
<snip>
> Steve Blackmore
> --

Hi Steve, all,

Any idea how the solenoid is activated ? what makes it vibrate ? and
does it run at 60 hz or some multiple ? or is there some external
occilator that drives it ?

I have seen those larger tap busters on e-bay, but they run into the
hundreds of pounds of metal, so the shipping would be horrible.

A hose connected to an EDM that is once thru and washes out the chips
is not as bad trying to recycle water with a pump.

Dave

Discussion Thread

electromodeler 2007-03-09 11:33:49 UTC cheap edm tap buster? Andy Wander 2007-03-09 12:12:13 UTC RE: [CAD_CAM_EDM_DRO] cheap edm tap buster? Jon Elson 2007-03-09 19:29:48 UTC Re: [CAD_CAM_EDM_DRO] cheap edm tap buster? turbulatordude 2007-03-09 21:03:12 UTC Re: cheap edm tap buster? Brian Worth 2007-03-10 00:03:36 UTC Re: [CAD_CAM_EDM_DRO] cheap edm tap buster? Mark Vaughan 2007-03-10 10:01:31 UTC RE: [CAD_CAM_EDM_DRO] cheap edm tap buster? Jon Elson 2007-03-10 21:29:17 UTC Re: [CAD_CAM_EDM_DRO] cheap edm tap buster? Mark Vaughan 2007-03-11 00:57:59 UTC RE: [CAD_CAM_EDM_DRO] cheap edm tap buster? Paul Kelly 2007-03-11 01:22:15 UTC RE: [CAD_CAM_EDM_DRO] cheap edm tap buster? caudlet 2007-03-11 09:31:18 UTC Re: cheap edm tap buster? Steve Blackmore 2007-03-11 13:42:17 UTC Re: [CAD_CAM_EDM_DRO] cheap edm tap buster? turbulatordude 2007-03-11 16:39:16 UTC Re: cheap edm tap buster? Steve Blackmore 2007-03-11 18:36:10 UTC Re: [CAD_CAM_EDM_DRO] Re: cheap edm tap buster? turbulatordude 2007-03-11 18:54:03 UTC Re: cheap edm tap buster? Jon Elson 2007-03-11 20:50:11 UTC Re: [CAD_CAM_EDM_DRO] cheap edm tap buster? Mark Vaughan 2007-03-11 22:21:12 UTC RE: [CAD_CAM_EDM_DRO] cheap edm tap buster? turbulatordude 2007-03-12 05:00:02 UTC Re: cheap edm tap buster? Jon Elson 2007-03-12 09:31:22 UTC Re: [CAD_CAM_EDM_DRO] Re: cheap edm tap buster?