RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Posted by
Mark Vaughan
on 2007-03-10 10:01:31 UTC
I note here Jon had problems finding a suitable fluid.
In the wire machines we use deionised water, which is deionised by pumping
it through resin after it comes out of the filters.
But on the EDM sinkers we use paraffin, and a fire extinguisher just in
case.
Paraffin is quite cheap, and readily available. I have never seen a machine
go up in smoke, but if you play with this I would suggest to be very
cautious.
Regs Mark
Dr. Mark Vaughan Ph'D. B.Eng. M0VAU
Managing Director
Vaughan Industries Ltd, reg in UK no 2561068
Water Care Technology Ltd, reg in UK no 4129351
Addr Unit3, Sydney House, Blackwater, Truro, Cornwall, TR4 8HH, UK.
Phone/Fax 44 1872 561288
_____
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of electromodeler
Sent: 09 March 2007 19:34
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Hi group, I came across this page while browsing about. Seems do-able
on a small budget, but are the electronics sound? It seems too simple.
Perhaps someone with a bit more knowledge can check it out? web page
is http://www.pico- <http://www.pico-systems.com/edm.html>
systems.com/edm.html
regards,
Brian
[Non-text portions of this message have been removed]
In the wire machines we use deionised water, which is deionised by pumping
it through resin after it comes out of the filters.
But on the EDM sinkers we use paraffin, and a fire extinguisher just in
case.
Paraffin is quite cheap, and readily available. I have never seen a machine
go up in smoke, but if you play with this I would suggest to be very
cautious.
Regs Mark
Dr. Mark Vaughan Ph'D. B.Eng. M0VAU
Managing Director
Vaughan Industries Ltd, reg in UK no 2561068
Water Care Technology Ltd, reg in UK no 4129351
Addr Unit3, Sydney House, Blackwater, Truro, Cornwall, TR4 8HH, UK.
Phone/Fax 44 1872 561288
_____
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of electromodeler
Sent: 09 March 2007 19:34
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Hi group, I came across this page while browsing about. Seems do-able
on a small budget, but are the electronics sound? It seems too simple.
Perhaps someone with a bit more knowledge can check it out? web page
is http://www.pico- <http://www.pico-systems.com/edm.html>
systems.com/edm.html
regards,
Brian
[Non-text portions of this message have been removed]
Discussion Thread
electromodeler
2007-03-09 11:33:49 UTC
cheap edm tap buster?
Andy Wander
2007-03-09 12:12:13 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Jon Elson
2007-03-09 19:29:48 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
turbulatordude
2007-03-09 21:03:12 UTC
Re: cheap edm tap buster?
Brian Worth
2007-03-10 00:03:36 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Mark Vaughan
2007-03-10 10:01:31 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Jon Elson
2007-03-10 21:29:17 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Mark Vaughan
2007-03-11 00:57:59 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Paul Kelly
2007-03-11 01:22:15 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
caudlet
2007-03-11 09:31:18 UTC
Re: cheap edm tap buster?
Steve Blackmore
2007-03-11 13:42:17 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
turbulatordude
2007-03-11 16:39:16 UTC
Re: cheap edm tap buster?
Steve Blackmore
2007-03-11 18:36:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: cheap edm tap buster?
turbulatordude
2007-03-11 18:54:03 UTC
Re: cheap edm tap buster?
Jon Elson
2007-03-11 20:50:11 UTC
Re: [CAD_CAM_EDM_DRO] cheap edm tap buster?
Mark Vaughan
2007-03-11 22:21:12 UTC
RE: [CAD_CAM_EDM_DRO] cheap edm tap buster?
turbulatordude
2007-03-12 05:00:02 UTC
Re: cheap edm tap buster?
Jon Elson
2007-03-12 09:31:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: cheap edm tap buster?