CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP

on 2007-03-22 15:46:35 UTC
Les,

What is the type/brand of oil you use?

George



-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Leslie Newell
Sent: Wednesday, March 21, 2007 6:54 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP

This is why I use a very expensive vegetable oil based coolant with a
mister that breaks the oil into relatively large droplets.

Les

Discussion Thread

Polaraligned 2007-03-19 04:36:04 UTC 10,000 RPM spindle speed on a BP Wayne Weedon 2007-03-19 09:41:39 UTC Re: [CAD_CAM_EDM_DRO] 10,000 RPM spindle speed on a BP Doug M 2007-03-19 09:52:01 UTC Re: [CAD_CAM_EDM_DRO] 10,000 RPM spindle speed on a BP jerrybiehler 2007-03-19 15:06:49 UTC Re: 10,000 RPM spindle speed on a BP John Mesh 2007-03-19 21:31:23 UTC Re: 10,000 RPM spindle speed on a BP dgoadby 2007-03-20 04:26:37 UTC Re: 10,000 RPM spindle speed on a BP kiwiavi 2007-03-21 03:17:01 UTC Re: 10,000 RPM spindle speed on a BP Leslie Newell 2007-03-21 03:55:07 UTC Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP Jon Elson 2007-03-21 08:26:56 UTC Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP George Taylor, IV 2007-03-22 15:46:35 UTC RE: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP Leslie Newell 2007-03-22 17:10:53 UTC Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP John Mesh 2007-03-23 21:45:48 UTC Re: 10,000 RPM spindle speed on a BP