Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP
Posted by
Jon Elson
on 2007-03-21 08:26:56 UTC
kiwiavi wrote:
high-speed spindles. The amount of oil used is very small.
Jon
> We have been through this exercise. Question With misters, what do youHe was talking about BEARING lube, not cutting lube, for these
> want in your lungs ? What ever you use, some will end up there. Try
> and choose one that is supposidly health freindly. No doubt time will
> tell! Pass me another cigarette !!!!
high-speed spindles. The amount of oil used is very small.
Jon
Discussion Thread
Polaraligned
2007-03-19 04:36:04 UTC
10,000 RPM spindle speed on a BP
Wayne Weedon
2007-03-19 09:41:39 UTC
Re: [CAD_CAM_EDM_DRO] 10,000 RPM spindle speed on a BP
Doug M
2007-03-19 09:52:01 UTC
Re: [CAD_CAM_EDM_DRO] 10,000 RPM spindle speed on a BP
jerrybiehler
2007-03-19 15:06:49 UTC
Re: 10,000 RPM spindle speed on a BP
John Mesh
2007-03-19 21:31:23 UTC
Re: 10,000 RPM spindle speed on a BP
dgoadby
2007-03-20 04:26:37 UTC
Re: 10,000 RPM spindle speed on a BP
kiwiavi
2007-03-21 03:17:01 UTC
Re: 10,000 RPM spindle speed on a BP
Leslie Newell
2007-03-21 03:55:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP
Jon Elson
2007-03-21 08:26:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP
George Taylor, IV
2007-03-22 15:46:35 UTC
RE: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP
Leslie Newell
2007-03-22 17:10:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: 10,000 RPM spindle speed on a BP
John Mesh
2007-03-23 21:45:48 UTC
Re: 10,000 RPM spindle speed on a BP