Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
Posted by
Lester Caine
on 2007-04-29 02:56:46 UTC
Filipe Tomaz wrote:
Not knowing what you are trying to 'model', it's difficult to help, and your
original question was a little vague ;)
The lazycam package in Mach3 will give you gCode from profiles, so you can
meet the requirement listed above. This will take slices from a CAD drawing
and move the tool to that profile. Your customer will be able to add commands
*TO* that gCode to control the tool. Pocketing will raster the area, so rather
than machining outside the profile you machine inside.
You just need to reverse WHAT you want to machine and ask the gCode generator
for that, something the Mach3 can do easily.
If you need something to DRAW the profiles - TurboCAD will handle 2D and 3D
quite happily. If you need to move to full 3D profiles, then Cut3D will
provide that.
Mach3 - $150 - http://www.machsupport.com/
TurboCAD - under $100 - Google it for best price ;)
Cut3D - $299 - http://www.vectric.com/WebSite/Vectric/cut3d/c3d_index.htm
--
Lester Caine - G8HFL
-----------------------------
Contact - http://home.lsces.co.uk/lsces/wiki/?page=contact
L.S.Caine Electronic Services - http://home.lsces.co.uk
MEDW - http://home.lsces.co.uk/ModelEngineersDigitalWorkshop/
Firebird Foundation Inc. - http://www.firebirdsql.org/index.php
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Lester Caine <lsces@...> wrote:( Switching to proper posting :) )
>> Filipe Tomaz wrote:
>>> My company will only be responsible for positioning the "tool". What
>>> tool is it, or what will it inject, I don't know and I don't "care"
>>> for my part of the machine. They are developers, so my problem ends if
>>> I can demonstrate that the machine will follow a toolpath that
>>> corresponds to the object.
>>>
>>> My question is only where is the software ?
>>> That is all, since the machine, I can build.
>> Mach3?
>> That will follow a gCode path and provides options for adding values
> to the
>> gCode to control the inject.
>> THEN the problem is software to write the gCode ;)
> Yes, I "only" need the CAM to write the gcode under $2000. Since thisOK - As a starting point have you looked at Mach3?
> is a CAD CAM list, someone, I hope, should know.
Not knowing what you are trying to 'model', it's difficult to help, and your
original question was a little vague ;)
The lazycam package in Mach3 will give you gCode from profiles, so you can
meet the requirement listed above. This will take slices from a CAD drawing
and move the tool to that profile. Your customer will be able to add commands
*TO* that gCode to control the tool. Pocketing will raster the area, so rather
than machining outside the profile you machine inside.
You just need to reverse WHAT you want to machine and ask the gCode generator
for that, something the Mach3 can do easily.
If you need something to DRAW the profiles - TurboCAD will handle 2D and 3D
quite happily. If you need to move to full 3D profiles, then Cut3D will
provide that.
Mach3 - $150 - http://www.machsupport.com/
TurboCAD - under $100 - Google it for best price ;)
Cut3D - $299 - http://www.vectric.com/WebSite/Vectric/cut3d/c3d_index.htm
--
Lester Caine - G8HFL
-----------------------------
Contact - http://home.lsces.co.uk/lsces/wiki/?page=contact
L.S.Caine Electronic Services - http://home.lsces.co.uk
MEDW - http://home.lsces.co.uk/ModelEngineersDigitalWorkshop/
Firebird Foundation Inc. - http://www.firebirdsql.org/index.php
Discussion Thread
Filipe Tomaz
2007-04-28 02:46:18 UTC
Reverse CAD CAM
Dan Mauch
2007-04-28 06:39:54 UTC
Re: [CAD_CAM_EDM_DRO] Reverse CAD CAM
Mark Vaughan
2007-04-28 09:30:11 UTC
RE: [CAD_CAM_EDM_DRO] Reverse CAD CAM
Filipe Tomaz
2007-04-28 11:42:41 UTC
Re: Reverse CAD CAM
Mark Vaughan
2007-04-28 12:54:00 UTC
RE: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
David G. LeVine
2007-04-28 14:24:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
Filipe Tomaz
2007-04-28 23:56:17 UTC
Re: Reverse CAD CAM
Lester Caine
2007-04-29 00:42:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
Filipe Tomaz
2007-04-29 01:55:46 UTC
Re: Reverse CAD CAM
Lester Caine
2007-04-29 02:56:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
turbulatordude
2007-04-29 06:34:50 UTC
Re: Reverse CAD CAM
Filipe Tomaz
2007-04-29 06:53:15 UTC
Re: Reverse CAD CAM
Filipe Tomaz
2007-04-29 07:11:11 UTC
Re: Reverse CAD CAM
Dhiren Shah
2007-04-29 07:15:41 UTC
Re: Reverse CAD CAM
Steve Blackmore
2007-04-29 07:21:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
Lester Caine
2007-04-29 08:18:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM
Lester Caine
2007-04-29 08:19:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM