CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM

Posted by Lester Caine
on 2007-04-29 08:19:17 UTC
Filipe Tomaz wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Lester Caine <lsces@...> wrote:
>> Filipe Tomaz wrote:
>>> My company will only be responsible for positioning the "tool". What
>>> tool is it, or what will it inject, I don't know and I don't "care"
>>> for my part of the machine. They are developers, so my problem ends if
>>> I can demonstrate that the machine will follow a toolpath that
>>> corresponds to the object.
>>>
>>> My question is only where is the software ?
>>> That is all, since the machine, I can build.
>> Mach3?
>> That will follow a gCode path and provides options for adding values
> to the
>> gCode to control the inject.
>> THEN the problem is software to write the gCode ;)

( Switching to proper posting :) )
> Yes, I "only" need the CAM to write the gcode under $2000. Since this
> is a CAD CAM list, someone, I hope, should know.

OK - As a starting point have you looked at Mach3?
Not knowing what you are trying to 'model', it's difficult to help, and your
original question was a little vague ;)
The lazycam package in Mach3 will give you gCode from profiles, so you can
meet the requirement listed above. This will take slices from a CAD drawing
and move the tool to that profile. Your customer will be able to add commands
*TO* that gCode to control the tool. Pocketing will raster the area, so rather
than machining outside the profile you machine inside.
You just need to reverse WHAT you want to machine and ask the gCode generator
for that, something the Mach3 can do easily.

If you need something to DRAW the profiles - TurboCAD will handle 2D and 3D
quite happily. If you need to move to full 3D profiles, then Cut3D will
provide that.

Mach3 - $150 - http://www.machsupport.com/
TurboCAD - under $100 - Google it for best price ;)
Cut3D - $299 - http://www.vectric.com/WebSite/Vectric/cut3d/c3d_index.htm



--
Lester Caine - G8HFL
-----------------------------
Contact - http://home.lsces.co.uk/lsces/wiki/?page=contact
L.S.Caine Electronic Services - http://home.lsces.co.uk
MEDW - http://home.lsces.co.uk/ModelEngineersDigitalWorkshop/
Firebird Foundation Inc. - http://www.firebirdsql.org/index.php

Discussion Thread

Filipe Tomaz 2007-04-28 02:46:18 UTC Reverse CAD CAM Dan Mauch 2007-04-28 06:39:54 UTC Re: [CAD_CAM_EDM_DRO] Reverse CAD CAM Mark Vaughan 2007-04-28 09:30:11 UTC RE: [CAD_CAM_EDM_DRO] Reverse CAD CAM Filipe Tomaz 2007-04-28 11:42:41 UTC Re: Reverse CAD CAM Mark Vaughan 2007-04-28 12:54:00 UTC RE: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM David G. LeVine 2007-04-28 14:24:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM Filipe Tomaz 2007-04-28 23:56:17 UTC Re: Reverse CAD CAM Lester Caine 2007-04-29 00:42:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM Filipe Tomaz 2007-04-29 01:55:46 UTC Re: Reverse CAD CAM Lester Caine 2007-04-29 02:56:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM turbulatordude 2007-04-29 06:34:50 UTC Re: Reverse CAD CAM Filipe Tomaz 2007-04-29 06:53:15 UTC Re: Reverse CAD CAM Filipe Tomaz 2007-04-29 07:11:11 UTC Re: Reverse CAD CAM Dhiren Shah 2007-04-29 07:15:41 UTC Re: Reverse CAD CAM Steve Blackmore 2007-04-29 07:21:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM Lester Caine 2007-04-29 08:18:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM Lester Caine 2007-04-29 08:19:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Reverse CAD CAM