Re: Reverse CAD CAM

This is for 3D, not 2D like (I think sheetcam will handle). The
problem is .STL -> GCODE.

But I think the dolphin software, was pointed have it, but execeds $2000.

Thank you.

>
> This is a very simple problem.
>
> as you know, any CAD package will draw your parts, and export a DXF
> file. You can use CorelDRAW to make test or other figures and also
> export a drawing file.
>
> SHEETCAM will take the DXF or COREL file and convert it to a G-Code

file.

>
> MACH will then drive the machine's motors on all three axes.
>
> Although you do no require the ability to set tool offsets, that
> feature is part of the software.
>
> I am not sure if how many all-in-one programs there, but there are
> some that allow you to draw and then control your machines axes.
>
> If you are only interested in the drawing or part creation, look at a
> CAD program or CorelDRAW combined with SheetCAM.
>
> That combination will allow you to wind up with a G-code file, but
> will lack the software to actually send the g-code to the machine.
>
> Dolphin may be able to offer the modules you need.
> http://www.dolphin.zenwebhosting.com/
>
> Dave
>