Re: [CAD_CAM_EDM_DRO] looking for some gearheads

At 05:07 PM 7/28/2007, you wrote:

>I need a couple of 90 degree gearheads,
>I can use ratio between 7:1 to 15:1
>frame size 34 or 42 or metric size 90 or 115

While not exactly "off list", take a look at www.surpluscenter.com in
their "power transmission" "gear reducer" section.

They are not cheap ($100-$200 for smaller ones), but you might find
what you want. This is of general interest, or it would have been off list.


David G. LeVine
Nashua, NH 03060