RE: [CAD_CAM_EDM_DRO] looking for some gearheads

It's not really off list if they are to be used for a CNC conversion.

Such items could prove very useful in many applications here.



Dr. Mark Vaughan Ph'D. B.Eng. M0VAU

Managing Director

Vaughan Industries Ltd, reg in UK no 2561068

Water Care Technology Ltd, reg in UK no 4129351

Addr Unit3, Sydney House, Blackwater, Truro, Cornwall, TR4 8HH, UK.
Phone/Fax 44 1872 561288

RSGB DRM111(Cornwall)

_____

From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of David G. LeVine
Sent: 28 July 2007 22:21
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] looking for some gearheads



At 05:07 PM 7/28/2007, you wrote:

>I need a couple of 90 degree gearheads,
>I can use ratio between 7:1 to 15:1
>frame size 34 or 42 or metric size 90 or 115

While not exactly "off list", take a look at www.surpluscenter.com in
their "power transmission" "gear reducer" section.

They are not cheap ($100-$200 for smaller ones), but you might find
what you want. This is of general interest, or it would have been off list.

David G. LeVine
Nashua, NH 03060





[Non-text portions of this message have been removed]