Re: EDM retrofit

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Scot Rogers <scotr@...> wrote:

>
> I don't normally post here, but I have to chime in.
>
> You don't really *have* to drill hard materials with diamond. You can
> use a ram edm with a small electrode too. There are even plans to make
> a small table top model that I built to burn stuff into hard materials.
>
> Look up "edm book" on ebay. You should be able to find one that has
> plans to build a pretty decent homebrew machine.
>
>

Actually Jon said "if you don't use EDM"

This is the Yahoo group related to the little RAM edm, it's RC based
and hence rather slow but its pretty neat anyway:

http://tech.groups.yahoo.com/group/EDMHomeBuilders/

Graham