Re: EDM retrofit
Posted by
Graham Stabler
on 2007-10-20 13:35:45 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Michael Fagan"
<woodworker88@...> wrote:
Threading the wire is not like threading a sewing machine you have a
0.2mm wire going through say a 3mm hole and the lower nozzle will be
smack against the bottom of the work for a pressure flushing system
perhaps further away for a submerged machine.
If the machine has a manual threading facility then that will be fine
if it has automatic then that's even better if you can work it.
Graham
<woodworker88@...> wrote:
>the wire
> Just out of curiosity, unless you're doing loads of production work,
> wouldn't it make sense to just drill the hole, then manually thread
> through?The holes are drilled or in hard materials made with a ram edm.
Threading the wire is not like threading a sewing machine you have a
0.2mm wire going through say a 3mm hole and the lower nozzle will be
smack against the bottom of the work for a pressure flushing system
perhaps further away for a submerged machine.
If the machine has a manual threading facility then that will be fine
if it has automatic then that's even better if you can work it.
Graham
Discussion Thread
WGB
2007-10-19 21:58:32 UTC
EDM retrofit
Graham Stabler
2007-10-20 05:51:59 UTC
Re: EDM retrofit
Harko Schwartz
2007-10-20 07:02:07 UTC
Re: [CAD_CAM_EDM_DRO] EDM retrofit
Stephen Wille Padnos
2007-10-20 08:13:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Graham Stabler
2007-10-20 08:49:25 UTC
Re: EDM retrofit
Stephen Wille Padnos
2007-10-20 09:12:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Jon Elson
2007-10-20 10:36:57 UTC
Re: [CAD_CAM_EDM_DRO] EDM retrofit
Graham Stabler
2007-10-20 11:13:15 UTC
Re: EDM retrofit
Graham Stabler
2007-10-20 11:19:01 UTC
Re: EDM retrofit
Michael Fagan
2007-10-20 11:42:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Graham Stabler
2007-10-20 13:35:45 UTC
Re: EDM retrofit
Jon Elson
2007-10-20 16:00:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Graham Stabler
2007-10-20 17:50:31 UTC
Re: EDM retrofit
Scot Rogers
2007-10-20 19:37:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Jon Elson
2007-10-20 20:52:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Graham Stabler
2007-10-21 04:40:10 UTC
Re: EDM retrofit
Graham Stabler
2007-10-21 04:43:07 UTC
Re: EDM retrofit
Scot Rogers
2007-10-21 13:56:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit
Michael Fagan
2007-10-21 17:51:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM retrofit