RE: [CAD_CAM_EDM_DRO] Re: CAM Software Advice for Shopmaster CNC

Hi,

Now if you offered this as a downloadable package that was feature
limited and then cost $150 or so for the full blown version one could
say wow! But, at $495 just to try it out to find it isn't suitable
(MACH is free for that) it's kind of expensive.

John

>
>
> There is another option that has yet to be mentioned.
>
> Combining a CAD interface with the machine control.
>
> This is done in the SuperCamXp program.
> http://www.super-tech.com/root/itm.asp?p1=itm-supercamxp
>
> This is an alternative to the conventional methods of machine
> control, in that the use of G-code files can be completely
> circumvented.
>
> To my knowledge there is no other program available that uses this
> method of human to machine interface.
>
> SuperCamXp has built in fonts which makes it easy for engraving.
>
> Essentially you can draw and cut.
>
> BMP, DXF, HPGL and G&M Code Files can be also imported.
>
> Imported drawings can be edited to make them suitable for machine
> tool paths.
>
> Dennis
> http://www.super-tech.com
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>