Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Posted by
Drew Rogge
on 2007-12-17 12:23:32 UTC
I took a look at their documentation and it looks like it has
just a single input, J5. I'll have to see if someone confirms
that I can wire-or all the G3x0 ERR pins into a single connector.
Drew
vrsculptor wrote:
Drew Rogge
drew@...
just a single input, J5. I'll have to see if someone confirms
that I can wire-or all the G3x0 ERR pins into a single connector.
Drew
vrsculptor wrote:
> Drew,--
> PMDX-120
>
> Roger
>
Drew Rogge
drew@...
Discussion Thread
Drew Rogge
2007-12-17 11:39:04 UTC
Break out board with support for G320/G340 ERR output
vrsculptor
2007-12-17 11:51:11 UTC
Re: Break out board with support for G320/G340 ERR output
Drew Rogge
2007-12-17 12:23:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Leslie Newell
2007-12-17 12:39:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Peter Rosenholm
2007-12-17 12:39:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
caudlet
2007-12-17 13:52:58 UTC
Re: Break out board with support for G320/G340 ERR output
Drew Rogge
2007-12-18 07:14:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Arturo E. Duncan
2007-12-24 02:23:59 UTC
Re: Break out board with support for G320/G340 ERR output
John Delaney
2007-12-24 06:41:10 UTC
Re: Break out board with support for G320/G340 ERR output