Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Posted by
Leslie Newell
on 2007-12-17 12:39:00 UTC
No problem. They are designed to be wire ored. If one drive faults, the
others will sense it and stop as well.
Les
Drew Rogge wrote:
others will sense it and stop as well.
Les
Drew Rogge wrote:
> I took a look at their documentation and it looks like it has
> just a single input, J5. I'll have to see if someone confirms
> that I can wire-or all the G3x0 ERR pins into a single connector.
>
> Drew
>
Discussion Thread
Drew Rogge
2007-12-17 11:39:04 UTC
Break out board with support for G320/G340 ERR output
vrsculptor
2007-12-17 11:51:11 UTC
Re: Break out board with support for G320/G340 ERR output
Drew Rogge
2007-12-17 12:23:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Leslie Newell
2007-12-17 12:39:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Peter Rosenholm
2007-12-17 12:39:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
caudlet
2007-12-17 13:52:58 UTC
Re: Break out board with support for G320/G340 ERR output
Drew Rogge
2007-12-18 07:14:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Break out board with support for G320/G340 ERR output
Arturo E. Duncan
2007-12-24 02:23:59 UTC
Re: Break out board with support for G320/G340 ERR output
John Delaney
2007-12-24 06:41:10 UTC
Re: Break out board with support for G320/G340 ERR output