CAD CAM EDM DRO - Yahoo Group Archive

Re: Ballscrew machining

Posted by john_glynn57
on 2008-04-14 07:49:13 UTC
Thanks Steve,
I dont expect a problem in this area as the screw is only 400mm long
and 20mm diameter.

john
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Steve Blackmore <steve@...>
wrote:
>
> On Sun, 13 Apr 2008 21:06:23 -0000, you wrote:
>
> >Thanks for all the great advice. I have plenty of things to look
out
> >for now and it should work out especially as there is a huge
> >difference between the machined and unmachined cost of the
ballscrew.
>
> Hi John - only other thing that hasn't been mentioned (unless I
missed
> it) is the length of the screw hanging out of the back of the
headstock.
> Be careful it doesn't start to whip around!
>
> If it's really long, a makeshift stand with a couple of lumps of
wood
> fixed in a V shape to stop the droop will work.
>
> Steve Blackmore
> --
>

Discussion Thread

john_glynn57 2008-04-12 08:24:01 UTC Ballscrew machining stan 2008-04-12 08:44:21 UTC Ref: Ballscrew machining Torsten 2008-04-12 08:50:19 UTC Re: Ballscrew machining stan 2008-04-12 08:55:35 UTC Ref: Ballscrew machining gary burke 2008-04-12 09:04:19 UTC Re: [CAD_CAM_EDM_DRO] Ref: Ballscrew machining JanRwl@A... 2008-04-12 09:23:24 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew machining Jon Elson 2008-04-12 11:34:20 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew machining R Rogers 2008-04-12 13:47:21 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew machining Dan Mauch 2008-04-12 15:22:46 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew machining Steve Blackmore 2008-04-12 16:47:12 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew machining NEVILLE WEBSTER 2008-04-12 16:51:40 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew machining carbonsteelsam 2008-04-13 08:37:48 UTC Re: Ballscrew machining john_glynn57 2008-04-13 14:06:26 UTC Re: Ballscrew machining Steve Blackmore 2008-04-13 16:57:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrew machining john_glynn57 2008-04-14 07:49:13 UTC Re: Ballscrew machining