High voltage servo controller
Posted by
Mina Aboul Saad
on 2008-06-04 05:33:14 UTC
Hi,
I'm looking at a huge Cincinnati Milacron with Heidenhein control, unfortunately the control is totally ruined and needs replacement, the problem is the servos for the machine are huge and rated at 240V and 30A.
The machine is offered real cheap and would be a bargain if I could get it to work, so I was wondering if there is cheap way to control such motors using a PC, I used Geckos before but know their rating is 80V and 20A.
Regards,
Mina
[Non-text portions of this message have been removed]
I'm looking at a huge Cincinnati Milacron with Heidenhein control, unfortunately the control is totally ruined and needs replacement, the problem is the servos for the machine are huge and rated at 240V and 30A.
The machine is offered real cheap and would be a bargain if I could get it to work, so I was wondering if there is cheap way to control such motors using a PC, I used Geckos before but know their rating is 80V and 20A.
Regards,
Mina
[Non-text portions of this message have been removed]
Discussion Thread
Mina Aboul Saad
2008-06-04 05:33:14 UTC
High voltage servo controller
Dan Mauch
2008-06-04 07:35:48 UTC
Re: [CAD_CAM_EDM_DRO] High voltage servo controller
Stephen Wille Padnos
2008-06-04 07:53:53 UTC
Re: [CAD_CAM_EDM_DRO] High voltage servo controller
mina_aboulsaad
2008-06-04 11:28:39 UTC
Re: High voltage servo controller
gcode fi (hanermo)
2008-06-04 11:39:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Jim Peck
2008-06-04 17:16:10 UTC
RE: [CAD_CAM_EDM_DRO] High voltage servo controller
vrsculptor
2008-06-05 16:29:40 UTC
Re: High voltage servo controller
Jon Elson
2008-06-05 18:41:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
vrsculptor
2008-06-05 22:25:07 UTC
Re: High voltage servo controller
Henrik Olsson
2008-06-06 03:20:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Jcullins
2008-06-06 06:38:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Jon Elson
2008-06-06 09:05:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller