Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Posted by
gcode fi (hanermo)
on 2008-06-04 11:39:12 UTC
Rutex - maybe Stay away.
People much more qualified than me have tried and convinced themselves
they are more marketing than fact re: 200v and 40 amps.
There is a lot of technical detail about 1-2 years ago.
The granite devices stuff is supposed to be very good.
I highly recommend trying them -
I don´t know of anyone who has been disappointed with them- their rep is
excellent.
No personal experience, though, but I plan for granite for a step dir
lathe spindle of around 1 kW.
At 200 €/axis they are cheap, relative to the power.
mina_aboulsaad wrote:
People much more qualified than me have tried and convinced themselves
they are more marketing than fact re: 200v and 40 amps.
There is a lot of technical detail about 1-2 years ago.
The granite devices stuff is supposed to be very good.
I highly recommend trying them -
I don´t know of anyone who has been disappointed with them- their rep is
excellent.
No personal experience, though, but I plan for granite for a step dir
lathe spindle of around 1 kW.
At 200 €/axis they are cheap, relative to the power.
mina_aboulsaad wrote:
>
> Thanks guys,
> I just took a look at the machine and expect to make an offer, so I
> do not know if the servo amps are in working condition or shot, but I
> am trying to make a decison on a worst case.
> I am looking to use the machine for some serious work, it's hardly
> the size of a hobby machine.
> What about Rutex drives, are they any good I hear they have a 200V
> 40A servo drives?
> I am almost sure that the servo motors come with resolvers not
> encoders.
>
> Thanks for the info
>
> Mina
>
Discussion Thread
Mina Aboul Saad
2008-06-04 05:33:14 UTC
High voltage servo controller
Dan Mauch
2008-06-04 07:35:48 UTC
Re: [CAD_CAM_EDM_DRO] High voltage servo controller
Stephen Wille Padnos
2008-06-04 07:53:53 UTC
Re: [CAD_CAM_EDM_DRO] High voltage servo controller
mina_aboulsaad
2008-06-04 11:28:39 UTC
Re: High voltage servo controller
gcode fi (hanermo)
2008-06-04 11:39:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Jim Peck
2008-06-04 17:16:10 UTC
RE: [CAD_CAM_EDM_DRO] High voltage servo controller
vrsculptor
2008-06-05 16:29:40 UTC
Re: High voltage servo controller
Jon Elson
2008-06-05 18:41:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
vrsculptor
2008-06-05 22:25:07 UTC
Re: High voltage servo controller
Henrik Olsson
2008-06-06 03:20:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Jcullins
2008-06-06 06:38:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: High voltage servo controller
Jon Elson
2008-06-06 09:05:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: High voltage servo controller