CAD CAM EDM DRO - Yahoo Group Archive

Re: Vacuum pump for vacuum chuck?

Posted by Chris Horne
on 2008-07-04 09:36:02 UTC
>>SNIP >>
> _
> Might you share the brand of vacuum pump you use? Cole-Palmer,
Decker, Nash,
> Vooner, Robinair, Thomas Scientific, Gast .? Some months ago I bought a
> GAST DDA air pump, and have only used it a little as an aspirator.
Seems to
> work OK, but it isn't really a "vacuum" pump. Chuck
> _,_._,___
>
>> SNIP>>


Edwards Speedivac

I have two, one in use and one as a spare,
both quite old 240V single-stage, belt drive, sliding vane pumps.

One has a nice vapor trap on the top. Both were bought from eBay, the
first I bought worked right out of the box, the second required a
couple of hours strip-down and clean.

Discussion Thread

timgoldstein 2008-07-02 11:35:15 UTC Vacuum pump for vacuum chuck? Jack McKie 2008-07-02 12:19:44 UTC Re: [CAD_CAM_EDM_DRO] Vacuum pump for vacuum chuck? Chuck Merja 2008-07-02 16:01:10 UTC RE: [CAD_CAM_EDM_DRO] Vacuum pump for vacuum chuck? Jack McKie 2008-07-03 04:27:55 UTC RE: [CAD_CAM_EDM_DRO] Vacuum pump for vacuum chuck? Chris Brown 2008-07-03 04:48:51 UTC Re: Vacuum pump for vacuum chuck? erich10983@a... 2008-07-03 05:17:24 UTC Re: Vacuum pump for vacuum chuck? Chris Horne 2008-07-04 04:24:58 UTC Re: Vacuum pump for vacuum chuck? Chuck Merja 2008-07-04 05:36:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Vacuum pump for vacuum chuck? Chris Horne 2008-07-04 09:36:02 UTC Re: Vacuum pump for vacuum chuck? Wayne Weedon 2008-07-04 10:26:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Vacuum pump for vacuum chuck? carbonfibreuk 2008-07-13 18:44:38 UTC Re: Vacuum pump for vacuum chuck?