Re: [CAD_CAM_EDM_DRO] Limit Switch Connectors.
Posted by
Michael Fagan
on 2008-11-29 18:34:55 UTC
I have used regular wires through bulkhead fittings into terminal
strips, as well as panel mount Jones plugs (both wired together with
the stepper motor wires in a 12 pin version, as well as separate 2 or
4 pin varieties). I have seen people use 9 pin DIN connectors before,
amphenol plugs (pricey though), and multipole Anderson plugs (not
usually panelmount).
strips, as well as panel mount Jones plugs (both wired together with
the stepper motor wires in a 12 pin version, as well as separate 2 or
4 pin varieties). I have seen people use 9 pin DIN connectors before,
amphenol plugs (pricey though), and multipole Anderson plugs (not
usually panelmount).
On Sat, Nov 29, 2008 at 9:27 PM, John Dammeyer <johnd@...> wrote:
> A friend of mine is busy building up a CNC router called and asked me what
> I was planning on using for limit switch connectors into the 'CNC
> controller' box. For most of my stuff I use AMP CPC connectors because I
> have the pins and the crimper.
>
> But for someone who doesn't have that what sort of cable connectors are
> people using. I suggested since shielded cables with RCA phono plugs are
> available (even surplus) that they may be ideal although they could
> vibrate out I guess. Phone jacks in the 3.5mm size are another option.
>
> So what do people do? Run wires into the box onto terminal strips of
> their BOB? Or run wires from the terminal strips to some sort of metal
> panel connector. And then the mate out to the limit switches?
>
> Thanks
>
> John
>
> Automation Artisans Inc.
> http://www.autoartisans.com/ELS/
> Ph. 1 250 544 4950
>
>
Discussion Thread
Jack Mc Kie
2008-11-28 18:34:42 UTC
Stock gear drawing downloads???
KM6VV
2008-11-28 19:20:00 UTC
Re: [CAD_CAM_EDM_DRO] Stock gear drawing downloads???
George Williamson
2008-11-28 20:13:24 UTC
Re: Stock gear drawing downloads???
Alan Marconett
2008-11-28 21:26:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Stock gear drawing downloads???
Gary Davison
2008-11-29 05:30:31 UTC
Re: Stock gear drawing downloads???
ForestDruid
2008-11-29 07:50:22 UTC
Re: Stock gear drawing downloads???
KM6VV
2008-11-29 09:18:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Stock gear drawing downloads???
Jack McKie
2008-11-29 16:11:01 UTC
Re: [CAD_CAM_EDM_DRO] Stock gear drawing downloads???
one2watch999
2008-11-29 17:06:38 UTC
Re: Stock gear drawing downloads???
John Dammeyer
2008-11-29 18:27:56 UTC
Limit Switch Connectors.
Michael Fagan
2008-11-29 18:34:55 UTC
Re: [CAD_CAM_EDM_DRO] Limit Switch Connectors.
Bob Butcher
2008-11-30 07:07:48 UTC
Re:Limit Switch Connectors.