Re: [CAD_CAM_EDM_DRO] Re: Goldmine servos and Sherline

John,

These units are rated 6-24volts. Give it the lot and test the torque with a
pulley or dynamo.

Terry

> Bill,
>
> Well, that would be ok, because at 1600 steps per rev and 20 revs per
> inch on a Sherline that works out to .000031 per step which is far
> greater accuracy than the machine could ever produce. I guess the
> major question would be do these motors have enough torque to drive
> the Sherline mill? They are pretty powerful on 12 volts, maybe at 18
> volts they would have enough to get the job done.
>
> John