Re: [CAD_CAM_EDM_DRO] Re: CNC router build

--- On Wed, 4/1/09, Gary Davison <gld@...> wrote:


From: Gary Davison <gld@...>
Subject: [CAD_CAM_EDM_DRO] Re: CNC router build
To: CAD_CAM_EDM_DRO@yahoogroups.com
Date: Wednesday, April 1, 2009, 8:28 AM






Jack

Look at one of these http://www.minicraf ttools.com/ 38481.html

They have better bearings and run quieter than a Dremel.

Gary

--- In CAD_CAM_EDM_ DRO@yahoogroups. com, Jack McKie <freshwatermodels@ ...> wrote:
>
> Dave,
>  
> This is primarily a precision cnc router for patternmaking, not a mill for machining metal, so coolant won't be an issue. 
>  
> I am aware of limitations of Dremel which is why I am looking for an alternative.  Yes, noise and heat come with high cutting speed.   I will probably be using carbide end mills exclusively.  Part of the plan is to build a sound enclosure but I don't know much about this.
>  
> One alternative I am considering is using a mini-mill head with belt drive retrofit.   This would allow me quieter belt drive and R8 collets but the max rpm would be about 4000.
>  
> I don't want to get into building a spindle so am looking for alternatives.  I am wondering if there is a die grinder or dremel type tool that has better bearings and might be quieter than a standard router motor.
>  
> Jack
>  
>
>
> --- On Mon, 3/30/09, David LeVine <dlevine144@ ...> wrote:
>
>
> From: David LeVine <dlevine144@ ...>
> Subject: Re: [CAD_CAM_EDM_ DRO] CNC router build
> To: CAD_CAM_EDM_ DRO@yahoogroups. com
> Date: Monday, March 30, 2009, 3:50 PM
>
>
>
>
>
>
> Jack Mc Kie wrote:
> > <SNIP>I have a router and a Dremel tool that could be used but I am
> > considering some alternative hopeing to keep noise level down. Noise
> > is a concern I'm not sure how to deal with. I'm considering making a
> > box of some sort to house the router in and line it with some sort of
> > noise absorbing material. Any cost effective suggestions on how to
> > deal with noise supression would be welcome!
>
> 1. At high speed, everything gets noisy.
> 2. At high speed things get hot in a hurry.
> 3. A router or Dremel is not a good, precision spindle.
>
> If you have machining available, consider that a good, fixed speed
> spindle may be better for your needs.
>
> Put something like a 5200 or a pair of 7200 bearings on the tool end
> (angular contact preloaded bearings ensure good positional accuracy) and
> a slightly loose bearing on the other (so the shaft doesn't bind.) A
> 7200 pair is rated for 29,000 RPM, IIRC. For higher speeds, ceramic
> bearings work but are /*spendy! */Driven by a belt and an induction
> motor, such a spindle will be quieter, more robust (last longer) and
> more accurate, but heavier. Remember, lower speed is always better for
> bearing life. Smaller bearings and open bearings (especially with oil
> mist lubrication to remove heat) will run faster and last longer than
> shielded or sealed bearings.
>
> With a VFD and a 3 phase motor, you even get the variable speed
> advantages, but with a weight penalty. You may need a cooling fan if
> the VFD runs the motor slower than 75% of the rated speed.
>
> --
> David G. LeVine
> Nashua, NH 03060
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>



















[Non-text portions of this message have been removed]