CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] 4 Axis Cam Software

Posted by Jim fleig
on 2010-03-28 08:13:24 UTC
The software being requested would generate G code capable of
directing the movements of a 4 axis mill. The 4 axis mill could be
controlled by EMC2. EMC2 is CNC motion control software.

While Please advise a dollar amount that would qualify as
inexpensive. Please advise the application of the software. Metal
geometric shapes? Carvings in wood?

Have a good day,

Jim Fleig
www.cncservices.ws

Sent from my iPhone

On Mar 28, 2010, at 7:13 AM, Alfredo Sola <alfredo@...> wrote:

>
> > Does anyone know of a cheap 4 axis Cam Software ( preferably
> continuous
> > 4 axis )
>
> Doesn't EMC <http://www.linuxcnc.org/> fit the bill? It can't be
> cheaper :)
>
> --
> Alfredo Sola
> ASP5-RIPE
> http://alfredo.sola.es/
>


[Non-text portions of this message have been removed]

Discussion Thread

roboticscnc 2010-03-28 02:58:58 UTC 4 Axis Cam Software Alfredo Sola 2010-03-28 04:13:51 UTC Re: [CAD_CAM_EDM_DRO] 4 Axis Cam Software Jim fleig 2010-03-28 08:13:24 UTC Re: [CAD_CAM_EDM_DRO] 4 Axis Cam Software roboticscnc 2010-03-30 05:31:29 UTC Re: 4 Axis Cam Software Jim Fleig - CNC Services 2010-03-30 10:08:12 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software William Thomas 2010-03-30 10:55:40 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software Jon Elson 2010-03-30 18:39:42 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software Peter Reilley 2010-03-30 18:44:41 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software Stephen Wille Padnos 2010-03-31 01:04:45 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software William Thomas 2010-03-31 21:33:36 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software imserv1 2010-04-01 06:22:02 UTC Re: 4 Axis Cam Software Jim fleig 2010-04-02 07:06:55 UTC Re: [CAD_CAM_EDM_DRO] Re: 4 Axis Cam Software