Re: Brdgprt CNC2 w Centroid
Posted by
polaraligned
on 2011-02-03 04:17:23 UTC
should I look to upgrade to something like Geckos or some other driver
Centroid is arguable the best retrofit you can buy. Used by many professional shops. Not going to find any Gecko's or other drives in any pro shops.
Depending on what model Centroid you have, it certainly has some resale value. If I were you, I would see how much it costs to fix the Centroid. Last I knew, you could swap an axis and get a rebuilt one from Centroid for $400. Hard to beat that.
Scott
> that I could control with a PC? And what would be the cost to do this? AndUpgrade from Centroid to Geckos? I think that is going backwards.
> is there any resale value to the Centroid system???
>
Centroid is arguable the best retrofit you can buy. Used by many professional shops. Not going to find any Gecko's or other drives in any pro shops.
Depending on what model Centroid you have, it certainly has some resale value. If I were you, I would see how much it costs to fix the Centroid. Last I knew, you could swap an axis and get a rebuilt one from Centroid for $400. Hard to beat that.
Scott
Discussion Thread
ebiz_59
2011-01-24 20:15:57 UTC
Brdgprt CNC2 w Centroid
ebiz_59
2011-01-24 20:16:02 UTC
Brdgprt CNC2 w Centroid
polaraligned
2011-01-25 03:54:35 UTC
Re: Brdgprt CNC2 w Centroid
danmauch
2011-01-25 06:51:48 UTC
Re: Brdgprt CNC2 w Centroid
Chuck Merja
2011-01-25 08:19:41 UTC
RE: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid
danmauch
2011-01-25 08:59:30 UTC
Re: Brdgprt CNC2 w Centroid
samcoinc2001
2011-01-25 09:01:52 UTC
Re: Brdgprt CNC2 w Centroid
danmauch
2011-01-25 09:09:48 UTC
Re: Brdgprt CNC2 w Centroid
David G. LeVine
2011-01-25 10:16:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid
John Chernick
2011-01-25 10:22:25 UTC
Re: [CAD_CAM_EDM_DRO] Brdgprt CNC2 w Centroid
Steve Blackmore
2011-01-25 15:01:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid
Chuck Merja
2011-01-26 07:42:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid
Les Newell
2011-01-26 08:15:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid
danmauch
2011-01-26 08:38:15 UTC
Re: Brdgprt CNC2 w Centroid
Chuck Merja
2011-02-02 13:16:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid
polaraligned
2011-02-03 04:17:23 UTC
Re: Brdgprt CNC2 w Centroid
Chuck Merja
2012-03-07 07:18:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: Brdgprt CNC2 w Centroid