CAD CAM EDM DRO - Yahoo Group Archive

GECKO resistors

Posted by Chuck Merja
on 2011-11-22 15:00:08 UTC
I got my G540 and see that I need some resistors across the 1 and 5 pins on
each motor drive. The motors are 2.8 ohm, so I need 2800 ohm resistors. I
have 2900 and 2200 - is it ok to use the 2.9K?
thanks

Chuck Merja



[Non-text portions of this message have been removed]

Discussion Thread

Chuck Merja 2011-11-22 15:00:08 UTC GECKO resistors Andy Wander 2011-11-22 15:10:02 UTC RE: [CAD_CAM_EDM_DRO] GECKO resistors Michael Fagan 2011-11-22 15:10:39 UTC Re: [CAD_CAM_EDM_DRO] GECKO resistors FocusKnobs 2011-11-22 15:31:57 UTC RE: [CAD_CAM_EDM_DRO] GECKO resistors Chuck Merja 2011-11-22 19:25:07 UTC RE: [CAD_CAM_EDM_DRO] GECKO resistors Dan Field 2011-11-22 20:34:18 UTC Re: [CAD_CAM_EDM_DRO] GECKO resistors chuck 2011-11-22 20:43:18 UTC Re: [CAD_CAM_EDM_DRO] GECKO resistors Dan Field 2011-11-22 23:16:51 UTC Re: [CAD_CAM_EDM_DRO] GECKO resistors markotime 2011-11-23 04:28:11 UTC Re: GECKO resistors Chuck Merja 2011-11-23 05:08:22 UTC RE: [CAD_CAM_EDM_DRO] GECKO resistors Dan Mauch 2011-11-23 07:06:18 UTC RE: [CAD_CAM_EDM_DRO] GECKO resistors