CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill?

Posted by Jon Elson
on 2012-05-28 10:04:34 UTC
Craig Carmichael wrote:
> Hi,
>
> Thanks Brian and Ron for your suggestions, but it looks like I'm not
> there yet and am still looking.
>
> Brian, 'Dxf2gcode' says a "point" is an undefined geometric type, and
> for circles, it wants to mill around the periphery rather than to go
> at any time to the center where I could tell it to drill.
>
> So it looks like a great program for milling, but as far as I can
> tell, it can't be used for drilling holes.
>
Well, I wrote some little C programs that read in a file of X, Y pairs
and output
useful G-code programs. One generates 3 files, to spot, drill through
and tap
the holes. You answer a few questions about depth and feedrate for each
operation.
If you are only drilling, for example, you just throw the extra files away.

I also have a program to do regular grids of holes.

So, I never use a CAD package for these simple tasks. The G-code is
so simple you can write it yourself, too.

Jon

Discussion Thread

Bill Griggs 2012-05-07 07:44:10 UTC Photo album updates Douglas Vogt 2012-05-12 22:37:07 UTC Re: [CAD_CAM_EDM_DRO] Photo album updates William C. Griggs 2012-05-13 10:03:23 UTC Re: Photo album updates Ron Ginger 2012-05-14 05:12:57 UTC Re: Photo album updates David G. LeVine 2012-05-14 14:37:58 UTC [OT] Why shops will be replaced by weight rooms. turbulatordude 2012-05-15 04:02:13 UTC Re: Photo album updates Craig Carmichael 2012-05-24 19:08:12 UTC LibreCad/.DXF to G-Code for CNC drill? Brian Worth 2012-05-25 00:04:02 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Ron Thompson 2012-05-25 05:11:30 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Craig Carmichael 2012-05-28 00:16:46 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Randall Wink 2012-05-28 04:25:47 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Ron Thompson 2012-05-28 04:49:19 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Chuck Merja 2012-05-28 07:01:11 UTC RE: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Jon Elson 2012-05-28 10:04:34 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Craig Carmichael 2012-05-29 00:49:57 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? turbulatordude 2012-05-29 03:19:29 UTC Re: LibreCad/.DXF to G-Code for CNC drill? Tony Smith 2012-05-29 10:04:01 UTC RE: [CAD_CAM_EDM_DRO] Re: LibreCad/.DXF to G-Code for CNC drill? turbulatordude 2012-05-30 04:07:32 UTC Re: LibreCad/.DXF to G-Code for CNC drill? Tony Smith 2012-05-30 06:51:17 UTC RE: [CAD_CAM_EDM_DRO] Re: LibreCad/.DXF to G-Code for CNC drill?