CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: LibreCad/.DXF to G-Code for CNC drill?

Posted by Tony Smith
on 2012-05-29 10:04:01 UTC
> set of holes. The distances are then filled in as the size changes.
>
> The key was learning to use the concatenate function to joint all the text
> together.


You don't really need Concatenate().

= Concatenate(A1, B1, C1) can be written as: = A1 & B1 & C1

& is of course "And", so it's "A1 and B1 and C1" etc

Tony

Discussion Thread

Bill Griggs 2012-05-07 07:44:10 UTC Photo album updates Douglas Vogt 2012-05-12 22:37:07 UTC Re: [CAD_CAM_EDM_DRO] Photo album updates William C. Griggs 2012-05-13 10:03:23 UTC Re: Photo album updates Ron Ginger 2012-05-14 05:12:57 UTC Re: Photo album updates David G. LeVine 2012-05-14 14:37:58 UTC [OT] Why shops will be replaced by weight rooms. turbulatordude 2012-05-15 04:02:13 UTC Re: Photo album updates Craig Carmichael 2012-05-24 19:08:12 UTC LibreCad/.DXF to G-Code for CNC drill? Brian Worth 2012-05-25 00:04:02 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Ron Thompson 2012-05-25 05:11:30 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Craig Carmichael 2012-05-28 00:16:46 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Randall Wink 2012-05-28 04:25:47 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Ron Thompson 2012-05-28 04:49:19 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Chuck Merja 2012-05-28 07:01:11 UTC RE: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Jon Elson 2012-05-28 10:04:34 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? Craig Carmichael 2012-05-29 00:49:57 UTC Re: [CAD_CAM_EDM_DRO] LibreCad/.DXF to G-Code for CNC drill? turbulatordude 2012-05-29 03:19:29 UTC Re: LibreCad/.DXF to G-Code for CNC drill? Tony Smith 2012-05-29 10:04:01 UTC RE: [CAD_CAM_EDM_DRO] Re: LibreCad/.DXF to G-Code for CNC drill? turbulatordude 2012-05-30 04:07:32 UTC Re: LibreCad/.DXF to G-Code for CNC drill? Tony Smith 2012-05-30 06:51:17 UTC RE: [CAD_CAM_EDM_DRO] Re: LibreCad/.DXF to G-Code for CNC drill?