CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod

Posted by Tony Smith
on 2013-06-17 10:18:14 UTC
> Unfortunately, you are off track.
> Your dimensions are WAY too small for anything except engraving.


...approximately 1000x1500x100mm (about 3ft by 5ft by 4 inches)

Yup. Way too small for anything useful.

Tony

Discussion Thread

Steve Greenfield 2013-06-17 08:25:59 UTC Long Acme threaded rod Andy Wander 2013-06-17 08:38:11 UTC RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod cnc sales (hanermo) 2013-06-17 08:44:50 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod Jamie Cunningham 2013-06-17 08:45:12 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod Roland Jollivet 2013-06-17 08:57:30 UTC [CAD_CAM_EDM_DRO] Long Acme threaded rod Art Eckstein 2013-06-17 09:01:34 UTC RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod cnc sales (hanermo) 2013-06-17 09:17:40 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod Tony Smith 2013-06-17 10:18:14 UTC RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod Tony Smith 2013-06-17 10:39:42 UTC RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod AlienRelics 2013-06-17 12:10:37 UTC Re: Long Acme threaded rod Jamie Cunningham 2013-06-17 12:14:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Long Acme threaded rod Roland Jollivet 2013-06-17 12:31:09 UTC [CAD_CAM_EDM_DRO] Re: Long Acme threaded rod Drew Rogge 2013-06-17 13:17:56 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod Steve Blackmore 2013-06-17 14:21:36 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod Ron Thompson 2013-06-17 15:41:38 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod AlienRelics 2013-06-17 18:39:04 UTC Re: Long Acme threaded rod jcc3inc 2013-06-18 07:07:03 UTC Re: Long Acme threaded rod David G. LeVine 2013-06-21 19:38:57 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod Steve Blackmore 2013-06-21 23:53:58 UTC Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod