Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Posted by
David G. LeVine
on 2013-06-21 19:38:57 UTC
On 06/17/2013 05:20 PM, Steve Blackmore wrote:
applied, but I doubt that you could measure the stretch on the belts
unless you were really careful! Stretch of a few tenths of a thousandth
of an inch per foot is not all that bad, but that is why there are
automatic tensioners on automotive timing belts.
However, if the stretch is small enough, who cares! There are bigger
errors to fight.
Dave 8{)
--
"A word to the wise ain't necessary - it's the stupid ones that need the
advice."
Bill Cosby
> They don't stretch.Well, they DO stretch, but so do 2" ball screws when enough force is
>
> See
>
> http://www.gates.com/facts/documents/Gf000284.pdf
> or
> http://www.sdp-si.com/D265/PDF/D265T003.pdf
>
> Steve Blackmore
applied, but I doubt that you could measure the stretch on the belts
unless you were really careful! Stretch of a few tenths of a thousandth
of an inch per foot is not all that bad, but that is why there are
automatic tensioners on automotive timing belts.
However, if the stretch is small enough, who cares! There are bigger
errors to fight.
Dave 8{)
--
"A word to the wise ain't necessary - it's the stupid ones that need the
advice."
Bill Cosby
Discussion Thread
Steve Greenfield
2013-06-17 08:25:59 UTC
Long Acme threaded rod
Andy Wander
2013-06-17 08:38:11 UTC
RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod
cnc sales (hanermo)
2013-06-17 08:44:50 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Jamie Cunningham
2013-06-17 08:45:12 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Roland Jollivet
2013-06-17 08:57:30 UTC
[CAD_CAM_EDM_DRO] Long Acme threaded rod
Art Eckstein
2013-06-17 09:01:34 UTC
RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod
cnc sales (hanermo)
2013-06-17 09:17:40 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Tony Smith
2013-06-17 10:18:14 UTC
RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Tony Smith
2013-06-17 10:39:42 UTC
RE: [CAD_CAM_EDM_DRO] Long Acme threaded rod
AlienRelics
2013-06-17 12:10:37 UTC
Re: Long Acme threaded rod
Jamie Cunningham
2013-06-17 12:14:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Long Acme threaded rod
Roland Jollivet
2013-06-17 12:31:09 UTC
[CAD_CAM_EDM_DRO] Re: Long Acme threaded rod
Drew Rogge
2013-06-17 13:17:56 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Steve Blackmore
2013-06-17 14:21:36 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Ron Thompson
2013-06-17 15:41:38 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
AlienRelics
2013-06-17 18:39:04 UTC
Re: Long Acme threaded rod
jcc3inc
2013-06-18 07:07:03 UTC
Re: Long Acme threaded rod
David G. LeVine
2013-06-21 19:38:57 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod
Steve Blackmore
2013-06-21 23:53:58 UTC
Re: [CAD_CAM_EDM_DRO] Long Acme threaded rod