CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Positioning

on 2014-06-09 10:48:55 UTC
On 06/08/2014 03:42 AM, Steve Blackmore steve@...
[CAD_CAM_EDM_DRO] wrote:
> The mythical zero-backlash - you mean low backlash?
>
> Steve Blackmore

Actually, Steve, zero backlash IS possible, but the caveats which go
with it are non-trivial. It usually only works over a very limited
range of loads and zero ERROR is not possible.

Dave 8{)
--

"A word to the wise ain't necessary - it's the stupid ones that need the
advice."

Bill Cosby

Discussion Thread

David G. LeVine 2014-06-01 14:52:58 UTC Positioning Hannu Venermo 2014-06-02 04:31:36 UTC Re: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-02 05:55:45 UTC RE: [CAD_CAM_EDM_DRO] Positioning Hannu Venermo 2014-06-02 22:08:15 UTC Re: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-02 22:46:24 UTC RE: [CAD_CAM_EDM_DRO] Positioning Hannu Venermo 2014-06-03 01:10:22 UTC Re: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-03 02:02:35 UTC RE: [CAD_CAM_EDM_DRO] Positioning Keith Burton 2014-06-03 03:35:10 UTC RE: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-03 06:40:53 UTC RE: [CAD_CAM_EDM_DRO] Positioning Hannu Venermo 2014-06-03 09:46:21 UTC Re: [CAD_CAM_EDM_DRO] Positioning John Anhalt 2014-06-03 10:28:10 UTC Re: [CAD_CAM_EDM_DRO] Positioning Christopher Erickson 2014-06-03 10:31:22 UTC RE: [CAD_CAM_EDM_DRO] Positioning CS Mo 2014-06-03 10:38:42 UTC Re: [CAD_CAM_EDM_DRO] Positioning Jon Elson 2014-06-03 11:02:30 UTC Re: [CAD_CAM_EDM_DRO] Positioning CS Mo 2014-06-03 11:19:27 UTC Re: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-03 12:11:47 UTC RE: [CAD_CAM_EDM_DRO] Positioning Andy Wander 2014-06-03 12:42:29 UTC RE: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-03 13:39:23 UTC RE: [CAD_CAM_EDM_DRO] Positioning Randall Wink 2014-06-03 14:48:12 UTC RE: [CAD_CAM_EDM_DRO] Positioning Jon Elson 2014-06-03 19:42:16 UTC Re: [CAD_CAM_EDM_DRO] Positioning William Thomas 2014-06-03 19:55:50 UTC [CAD_CAM_EDM_DRO] Positioning Jon Elson 2014-06-03 21:14:51 UTC Re: [CAD_CAM_EDM_DRO] Positioning William Thomas 2014-06-04 10:30:56 UTC Re: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-07 10:36:28 UTC RE: [CAD_CAM_EDM_DRO] Positioning Hannu Venermo 2014-06-07 10:52:15 UTC Re: [CAD_CAM_EDM_DRO] Positioning Steve Blackmore 2014-06-08 00:42:15 UTC Re: [CAD_CAM_EDM_DRO] Positioning Hannu Venermo 2014-06-08 23:26:25 UTC Re: [CAD_CAM_EDM_DRO] Positioning David G. LeVine 2014-06-09 10:48:55 UTC Re: [CAD_CAM_EDM_DRO] Positioning Steve Blackmore 2014-06-09 15:51:45 UTC Re: [CAD_CAM_EDM_DRO] Positioning David G. LeVine 2014-06-10 22:11:27 UTC Re: [CAD_CAM_EDM_DRO] Positioning Steve Blackmore 2014-06-10 23:32:12 UTC Re: [CAD_CAM_EDM_DRO] Positioning David G. LeVine 2014-06-12 15:55:17 UTC Re: [CAD_CAM_EDM_DRO] Positioning Steve Blackmore 2014-06-12 23:30:32 UTC Re: [CAD_CAM_EDM_DRO] Positioning Christopher Erickson 2014-06-18 15:43:45 UTC Re: [CAD_CAM_EDM_DRO] Positioning Christopher Erickson 2014-06-18 15:44:17 UTC RE: [CAD_CAM_EDM_DRO] Positioning Tony Smith 2014-06-18 15:44:45 UTC RE: [CAD_CAM_EDM_DRO] Positioning John Anhalt 2014-06-18 15:45:06 UTC Re: [CAD_CAM_EDM_DRO] Positioning ED MAISEY 2014-06-18 15:45:49 UTC Re: [CAD_CAM_EDM_DRO] Positioning Christopher Erickson 2014-06-18 15:45:55 UTC RE: [CAD_CAM_EDM_DRO] Positioning David Mannock 2014-06-18 15:46:04 UTC Re: [CAD_CAM_EDM_DRO] Positioning David G. LeVine 2014-06-20 15:33:34 UTC Re: [CAD_CAM_EDM_DRO] Positioning