Re:Gcode
Posted by
Alan Marconett KM6VV
on 2000-09-03 14:44:39 UTC
Ballendo,
I'm surprised on the DLX, since it's advertised as 4-axis, but that's
why I asked. No use spending more money for an update, if G18 & G19 are
missing. Is Otto in the US? I had the impression that MAXNC software
might have been written in another country. Not to be negative, but
just the impression I got from some of the key command selections. Easy
enough to learn to navigate it, 'tho. And the price with steppers,
drivers and software was cheap enough. Well, almost.
schematic I had before. I've done it with 7474 & 7486 as I recall, and
even state machines in PAL's. Just have to sit down and do it. I've
got a MAXNC PRO S&D waiting for them and 4 SD200 drivers. Might need
some motors.
it easier to draw!
Alan (back to drawing)
I'm surprised on the DLX, since it's advertised as 4-axis, but that's
why I asked. No use spending more money for an update, if G18 & G19 are
missing. Is Otto in the US? I had the impression that MAXNC software
might have been written in another country. Not to be negative, but
just the impression I got from some of the key command selections. Easy
enough to learn to navigate it, 'tho. And the price with steppers,
drivers and software was cheap enough. Well, almost.
> Alan,You mean S&D to phase? Yeah, I can do that. Can probably use the old
>
> >Does anyone know if the DLX version (4-axis cnc) does (I think I
> >can upgrade)?
>
> Just looked through the DLX manual. No G18 or G19 mentioned. I'll
> check with one of my machines soon as I can. Otto's not known for the
> completeness of his docs :( Best to call and ask, but only believe
> what Otto says.(he's the programmer) Mine is an old copy, actually
> one of the first 4 axis S&D to go out. He never did get the accel to
> work right for fast machines.(I gave up. He may have fixed it by now)
> Jog and G01 fighting each other. When one works, the other don't.
>
> >CNC Pro does (http://www.yeagerautomation.com/specs.htm), so that
> >might be a solution. I am still using 4-phase drive, don't know if
> >CNC Pro supports it. For what I am doing now, simple XY arcs are
> >fine on the Sherline. But later...
> >Alan
>
> Doug doesn't support phase drive in CNC pro... It is very easy to
> change from phase to step and direction drive. Two 5400/7400 type
> (cheap!) chips per axis, don't remember right now which ones, maybe
> someone else does? I'll look for how if you're interested.
>
schematic I had before. I've done it with 7474 & 7486 as I recall, and
even state machines in PAL's. Just have to sit down and do it. I've
got a MAXNC PRO S&D waiting for them and 4 SD200 drivers. Might need
some motors.
> Glad I could help with the arcs,I did enjoy getting a handle on the arcs in the other planes. Also made
>
> Ballendo (the restored) (was Ballendo the humbled, earlier today)
it easier to draw!
Alan (back to drawing)
Discussion Thread
ballendo@y...
2000-09-02 14:30:30 UTC
Re:Gcode
Alan Marconett KM6VV
2000-09-02 16:20:48 UTC
Re:Gcode
ballendo@y...
2000-09-02 17:55:53 UTC
Re:Gcode
Alan Marconett KM6VV
2000-09-02 22:13:41 UTC
Re:Gcode
ballendo@y...
2000-09-02 22:53:04 UTC
Re:Gcode
Alan Marconett KM6VV
2000-09-03 14:44:39 UTC
Re:Gcode
Hugh Currin
2000-09-03 14:46:07 UTC
Re: [CAD_CAM_EDM_DRO] Re:Gcode
Alan Marconett KM6VV
2000-09-03 15:01:42 UTC
Re:Gcode
ballendo@y...
2000-09-03 18:43:47 UTC
Re:Gcode
ballendo@y...
2000-09-03 18:51:19 UTC
Re:Gcode
ballendo@y...
2000-09-03 20:13:39 UTC
Re: Re:Gcode
Gene
2002-06-05 13:47:36 UTC
Gcode
James Stevens
2002-06-05 14:03:16 UTC
Re: [CAD_CAM_EDM_DRO] Gcode
Jon Elson
2002-06-05 16:55:17 UTC
Re: [CAD_CAM_EDM_DRO] Gcode
bjammin@i...
2002-06-06 04:37:12 UTC
Re: [CAD_CAM_EDM_DRO] Gcode
robert charles weiss
2002-06-06 14:48:06 UTC
Re: [CAD_CAM_EDM_DRO] Gcode
andrewyslee
2002-06-06 18:04:10 UTC
Re: Gcode
doug98105
2002-06-06 20:10:36 UTC
Re: Gcode
Jon Elson
2002-06-06 22:26:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gcode
remy
2003-11-13 15:58:21 UTC
Gcode
Torsten
2003-11-13 17:43:24 UTC
Re: Gcode