CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output

Posted by dave engvall
on 2000-10-14 17:19:22 UTC
>
> Or, if you'd just as soon fiddle with some nasty electronics, how about a plunger in
> a rectangular tube? Feed in microwaves and adjust frequency until it resonates.
>
>
> Annie "don't ask me how to measure the temp. of liquid helium" ogborn
>

Same thing works at audio freqs. Just sweep the freq and look for the resonance. Someone in the '60's used this to measure volume
in a buret.

Dave

Discussion Thread

bcollier@p... 2000-10-09 10:18:15 UTC Digital Caliper Output Jon Elson 2000-10-09 22:55:37 UTC Re: [CAD_CAM_EDM_DRO] Digital Caliper Output Doug Fortune 2000-10-09 23:42:18 UTC Re: [CAD_CAM_EDM_DRO] Digital Caliper Output bcollier@p... 2000-10-10 07:19:09 UTC Re: Digital Caliper Output Anne Ogborn 2000-10-10 10:33:37 UTC Re: [CAD_CAM_EDM_DRO] Digital Caliper Output Mark Fraser 2000-10-10 12:05:03 UTC Digital Caliper Output Jon Elson 2000-10-10 12:30:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output Lee Studley 2000-10-10 13:00:11 UTC Re: Digital Caliper Output Lee Studley 2000-10-10 13:00:34 UTC Re: Digital Caliper Output ballendo@y... 2000-10-10 15:29:25 UTC Re: Digital Caliper Output bcollier@p... 2000-10-11 07:19:22 UTC Re: Digital Caliper Output bcollier@p... 2000-10-11 07:26:12 UTC Re: Digital Caliper Output Anne Ogborn 2000-10-11 14:36:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output Lee Studley 2000-10-11 15:56:21 UTC Re: Digital Caliper Output Alison & Jim Gregg 2000-10-11 19:13:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output Anne Ogborn 2000-10-11 22:46:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output Alison & Jim Gregg 2000-10-11 23:21:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output dave engvall 2000-10-14 17:19:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Digital Caliper Output