Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation

60 seconds per minute, 60 minutes per degree

Phil Laliberte wrote:

> There are 60 seconds per degree.
>
> 60 seconds displayed to 4 decimal points gives 60/1000= .0100 degrees.
> In other words you can display every .0001 degrees.
> You have more than enough digits and resolution in your software, the
> limiting factor is now the hardware itself.
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager