Re: DeskNC limitation
Posted by
Alan Marconett KM6VV
on 2000-10-23 11:01:55 UTC
Phil,
Don't you mean 60 minutes per degree, and 60 seconds per minute?
Alan
Phil Laliberte wrote:
Don't you mean 60 minutes per degree, and 60 seconds per minute?
Alan
Phil Laliberte wrote:
>
> There are 60 seconds per degree.
>
> 60 seconds displayed to 4 decimal points gives 60/1000= .0100 degrees.
> In other words you can display every .0001 degrees.
> You have more than enough digits and resolution in your software, the
> limiting factor is now the hardware itself.
>
Discussion Thread
don.pat.brock@p...
2000-10-22 19:11:15 UTC
DeskNC limitation
Phil Laliberte
2000-10-22 20:16:55 UTC
Re: DeskNC limitation
Bill Darby
2000-10-22 20:20:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation
dougrasmussen@c...
2000-10-22 20:45:07 UTC
Re: DeskNC limitation
Tim Goldstein
2000-10-22 21:55:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC limitation
Phil Laliberte
2000-10-22 22:40:21 UTC
Re: DeskNC limitation
Jon Elson
2000-10-22 23:45:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation
don.pat.brock@p...
2000-10-23 00:16:53 UTC
Re: DeskNC limitation
Ray
2000-10-23 06:17:32 UTC
Re: Re: DeskNC limitation
Alan Marconett KM6VV
2000-10-23 11:01:55 UTC
Re: DeskNC limitation
Alan Marconett KM6VV
2000-10-23 11:27:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation