CAD CAM EDM DRO - Yahoo Group Archive

Re: DeskNC limitation

on 2000-10-22 22:40:21 UTC
Bill of course you are correct!

one degree = 3600 seconds
0.1 deg = 360 sec
0.01 deg = 36 sec
0.001 deg = 3.6 sec
0.0001 deg = .36 seconds

The software still has greater resolution than the hardware.

Discussion Thread

don.pat.brock@p... 2000-10-22 19:11:15 UTC DeskNC limitation Phil Laliberte 2000-10-22 20:16:55 UTC Re: DeskNC limitation Bill Darby 2000-10-22 20:20:53 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation dougrasmussen@c... 2000-10-22 20:45:07 UTC Re: DeskNC limitation Tim Goldstein 2000-10-22 21:55:28 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC limitation Phil Laliberte 2000-10-22 22:40:21 UTC Re: DeskNC limitation Jon Elson 2000-10-22 23:45:56 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation don.pat.brock@p... 2000-10-23 00:16:53 UTC Re: DeskNC limitation Ray 2000-10-23 06:17:32 UTC Re: Re: DeskNC limitation Alan Marconett KM6VV 2000-10-23 11:01:55 UTC Re: DeskNC limitation Alan Marconett KM6VV 2000-10-23 11:27:37 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC limitation