CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment

Posted by Smoke
on 2000-10-31 16:24:48 UTC
If you have enough room (srew hole depth) you could use 2 socket head set screws in each hole. Adjust the first one and lock it in place with the other one.


-----Original Message-----
From: Jon Anderson <janders@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Tuesday, October 31, 2000 4:01 PM
Subject: Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment


mnels@... wrote:
>
> How do you adjust the setscrews? They turn easily so I suspect some
> sort of threadlocking compound is needed? Is there a magic method to
> minimize the play while minimizing binding?

I used VibraTite on mine, $12 or so for a tiny bottle. If you let it dry
properly on the screw, it will hold it in place yet allow adjustment.
This adjustment is very finicky. BTW, the ano isn't hard. Get too tight
and/or fail to keep lubed, you'll wear through it in nothing flat.

Jon

eGroups Sponsor


Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
Post message: CAD_CAM_EDM_DRO@egroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
Moderator: jmelson@... [Moderator]
URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
FAQ: http://www.ktmarketing.com/faq.html
bill,
List Manager



[Non-text portions of this message have been removed]

Discussion Thread

mnels@p... 2000-10-31 12:37:12 UTC Help: MaxNC Gib Adjustment Jon Anderson 2000-10-31 15:03:53 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Smoke 2000-10-31 16:24:48 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Jon Anderson 2000-10-31 16:37:53 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Smoke 2000-10-31 16:44:41 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Carey L. Culpepper 2000-10-31 17:42:43 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Jon Anderson 2000-10-31 19:34:48 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Smoke 2000-10-31 19:54:45 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Mike 2000-10-31 22:50:25 UTC Re: MaxNC Gib Adjustment Tony Jeffree 2000-11-01 00:56:12 UTC Re: MaxNC Gib Adjustment Don 2000-11-01 01:16:09 UTC Re: Help: MaxNC Gib Adjustment Jon Elson 2000-11-01 15:52:35 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment Smoke 2000-11-01 16:57:03 UTC Re: [CAD_CAM_EDM_DRO] Help: MaxNC Gib Adjustment