Re: Cool Worm Gear
Posted by
Don
on 2000-11-03 00:53:35 UTC
I have made several worm gears this way.
I start with a blank that is slightly O/S and use
a high helix spiral flute tap, this way i don't need
to index the gear. The spilal flute helps "drive" the
gear around. Also, it keeps the tap teeth engaged all the time.
Works great. But watch out for 1/2 hard brass as it work hardens
quickly and will destroy a tap in no time flat.
Don
I start with a blank that is slightly O/S and use
a high helix spiral flute tap, this way i don't need
to index the gear. The spilal flute helps "drive" the
gear around. Also, it keeps the tap teeth engaged all the time.
Works great. But watch out for 1/2 hard brass as it work hardens
quickly and will destroy a tap in no time flat.
Don
Discussion Thread
Joe Vicars
2000-11-02 13:21:03 UTC
Cool Worm Gear
wanliker@a...
2000-11-02 13:55:58 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Alan Marconett KM6VV
2000-11-02 14:08:07 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-02 14:24:01 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Ian Wright
2000-11-02 15:27:48 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
paul@a...
2000-11-02 15:32:23 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Greg Nuspel
2000-11-02 15:56:30 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-02 16:07:32 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Wally K
2000-11-02 17:30:01 UTC
Re: Cool Worm Gear
paul@a...
2000-11-02 18:00:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cool Worm Gear
paul@a...
2000-11-02 18:05:56 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-02 19:23:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cool Worm Gear
Greg Nuspel
2000-11-02 19:54:23 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-02 20:01:32 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
wanliker@a...
2000-11-02 20:42:04 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-02 21:22:37 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Brian Pitt
2000-11-02 23:07:58 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-03 00:12:46 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Don
2000-11-03 00:53:35 UTC
Re: Cool Worm Gear
Brian Pitt
2000-11-03 01:28:11 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Ian Wright
2000-11-03 02:35:27 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Greg Nuspel
2000-11-03 02:38:27 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
diazden
2000-11-03 06:09:12 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
diazden
2000-11-03 06:09:14 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
diazden
2000-11-03 06:09:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cool Worm Gear
Smoke
2000-11-03 06:41:20 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
dave engvall
2000-11-03 07:25:23 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Smoke
2000-11-03 09:54:12 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Alan Marconett KM6VV
2000-11-03 11:39:31 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
James Owens
2000-11-03 11:41:14 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Ian Wright
2000-11-03 11:58:32 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Ian Wright
2000-11-03 13:33:13 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Alan Marconett KM6VV
2000-11-03 15:23:48 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
diazden
2000-11-04 10:11:10 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear
Ian Wright
2000-11-04 14:22:45 UTC
Re: [CAD_CAM_EDM_DRO] Cool Worm Gear