Re: [CAD_CAM_EDM_DRO] help with Y axis on bridgeport

Wally,

The internal (far) end of the Y axis is not supportted. If
you remove the four screws from the front bearing plate you
can simply unscrew the Y axis from the yoke nut. This is
assuming you have acme screws NOT ball screws.

Bob


At 12:22 AM 11/23/00 -0000, you wrote:

>I am trying to design the mounts for a bridgeport retrofit to CNC.
>my machine is assembled and i cannnot see how the internal end of the
>Y axis is mounted. Does anyone have pictures or drawings of this.
>Or any words of advice.
>
>Wally K.
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>
>