RE: EMC-programming request

I got a few minutes to play with it. The backlash comp does not seem to work
correctly yet. I would suggest that people stay with the 06-jul-1999 build
for now.

I will post more about it as I go.


Tim
[Denver, CO]

> -----Original Message-----
> From: Dan Falck [mailto:dfalck@...]
> Sent: Saturday, July 17, 1999 9:41 PM
> To: CAD_CAM_EDM_DRO@onelist.com
> Subject: RE: [CAD_CAM_EDM_DRO] EMC-programming request
>
>
> From: Dan Falck <dfalck@...>
>
> Tim,
>
> I haven't downloaded it yet. I have eliminated the backlash, by
> installing
> a ballscrew on the quill.
> This month is going to be very busy in my shop and I won't have much time
> for testing. I did get the home switches installed on the X and Y axis'
> though.
>
> Dan
>
> At 08:34 PM 7/17/99 -0600, you wrote:
> >From: "Tim Goldstein" <timg@...>
> >
> >SHHHH!!!
> >
> >Fred just put it together on Friday after I pestered him some
> more about the
> >backlash compensation. He was going to announce it after it got
> tested on an
> >actual machine. I was at a Promise Keepers conference Friday night and
> >today, so I haven't had an opportunity to test it. Have you
> loaded it up and
> >tried it yet? I plan on getting it tested out by Sunday night and letting
> >Fred know my results on Monday.
> >
> >
> >Tim
> >[Denver, CO]
> >
> >
> >> -----Original Message-----
> >> From: Dan Falck [mailto:dfalck@...]
> >> Sent: Friday, July 16, 1999 5:53 PM
> >> To: CAD_CAM_EDM_DRO@onelist.com
> >> Subject: [CAD_CAM_EDM_DRO] EMC-programming request
> >>
> >>
> >> From: Dan Falck <dfalck@...>
> >>
> >> It appears that there is a new release of EMC on the web site and the
> >> backlash is being addressed.
> >> For those of you wondering what I am writing about, go to :
> >>
> >> ftp://ftp.isd.cme.nist.gov/pub/emc/emcsoft/linux_2_0_36/emc-16-Jul
> >> -1999.txt
> >> and read the notes.
> >>
> >> Dan
>