interpolation and algorithms of multiple axes was Re: Pulse Gen

"Smoke" <Smoke@5...> wrote:

> Personally, I need 12 axis control. All of these might not

necessarily need


There is no reason to pause them. if made in banks of 4 you would
use 3 banks if made in banks of 6 you would use 2 banks.

> What exactly are you referring to when you list "spindle" as an

axis Wally?

> Standard G-codes already provide for on and off for the spindle.
>

Some people want full spindle speed control. You need this on 2
spindles of your dream machine if you want to thread.

> I'd prefer labeling all the axis as "open". This would allow the

operator

> to specify which axis was which. This would be ideal for 12 axis

control.

>

I did not want any axis labeled. I was just giving Mariss an idea of
axis typically used in case he thought 6 axis was excessive.

> >I vote for stackable off of a motherboard with a power supply able

to

> >power at least 6 axis. Transformer may be off board.
>
> Sounds good to me!
>
> Smoke

Wally K.