Re: CNC upgrade
Posted by
Peter Smith
on 1999-07-19 08:52:11 UTC
-----Original Message-----
From: TADGUNINC@... <TADGUNINC@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Saturday, July 17, 1999 1:08 AM
Subject: Re: [CAD_CAM_EDM_DRO] CNC upgrade
Sorry for the delay in replying, ( see Email to Tim)
Yes I am going to try and get hold of a copy of Linux 5.2 as soon as
possible, there is a computer fair on localy next Saturday so I may Pick
one up there.
I am still on the starting blocks as far as the learning curve goes, but
determination and a bit of enthusiasm can go a long way to getting you where
you want to go. I avoided computers for about 20 years, after a nasty
experience with a commodore Vic 20, or should I say 6 Vic 20s, which I
bought for my son when he was about 7, I got tired of taking them back to
the shop, and eventualy demanded my money back. This put me off Computers
full stop,
but eventualy they creep into the workplace, and you have to get to grips
with them at sometime or other, During that time I have probably lost a
lot of experience that I could have gained with them had I not been
dissilusioned.
Best Wishes
Peter Smith
Come on you Lurkers show yourselves, there must be some more UK members out
there with something to say, or ideas, or even criticism.
From: TADGUNINC@... <TADGUNINC@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Saturday, July 17, 1999 1:08 AM
Subject: Re: [CAD_CAM_EDM_DRO] CNC upgrade
>From: TADGUNINC@...Tracey
>
Sorry for the delay in replying, ( see Email to Tim)
Yes I am going to try and get hold of a copy of Linux 5.2 as soon as
possible, there is a computer fair on localy next Saturday so I may Pick
one up there.
I am still on the starting blocks as far as the learning curve goes, but
determination and a bit of enthusiasm can go a long way to getting you where
you want to go. I avoided computers for about 20 years, after a nasty
experience with a commodore Vic 20, or should I say 6 Vic 20s, which I
bought for my son when he was about 7, I got tired of taking them back to
the shop, and eventualy demanded my money back. This put me off Computers
full stop,
but eventualy they creep into the workplace, and you have to get to grips
with them at sometime or other, During that time I have probably lost a
lot of experience that I could have gained with them had I not been
dissilusioned.
Best Wishes
Peter Smith
Come on you Lurkers show yourselves, there must be some more UK members out
there with something to say, or ideas, or even criticism.
>Peter,long,
> Sounds like you are further along the learning curve than me, but I'm
>still having fun :o)
> If no one has said so yet, you want the 5.2 linux / "redhat"? not the 6.0
>and they are getting hard to find here in the US so I wouldn't wait too
>I just got mine the other day.discussion of shop built systems in the above catagories.
>Tracey
>
>--------------------------- ONElist Sponsor ----------------------------
>
>ONElist: your connection to people who share your interests.
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>
Discussion Thread
Peter Smith
1999-07-16 12:03:52 UTC
CNC upgrade
Tim Goldstein
1999-07-16 13:10:14 UTC
Re: CNC upgrade
TADGUNINC@x...
1999-07-16 18:01:27 UTC
Re: CNC upgrade
Peter Smith
1999-07-19 08:20:36 UTC
Re: CNC upgrade
Peter Smith
1999-07-19 08:52:11 UTC
Re: CNC upgrade
Ian W. Wright
1999-07-19 11:20:51 UTC
Re: CNC upgrade
Tim Goldstein
1999-07-19 23:36:21 UTC
RE: CNC upgrade
Peter Smith
1999-07-20 10:55:14 UTC
Re: CNC upgrade
smittys8002000
2002-08-10 19:55:54 UTC
CNC upgrade
Carol & Jerry Jankura
2002-08-10 20:32:36 UTC
RE: [CAD_CAM_EDM_DRO] CNC upgrade
todd smith
2002-08-10 23:02:52 UTC
Re: [CAD_CAM_EDM_DRO] CNC upgrade
wanliker@a...
2002-08-11 04:29:28 UTC
Re: [CAD_CAM_EDM_DRO] CNC upgrade
stevenson_engineers
2002-08-11 08:08:08 UTC
Re: CNC upgrade
Ray Henry
2002-08-11 15:43:21 UTC
Re: RE: CNC upgrade
Carol & Jerry Jankura
2002-08-11 19:44:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: RE: CNC upgrade
Jon Elson
2002-08-11 22:41:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: RE: CNC upgrade
Ray Henry
2002-08-12 10:33:17 UTC
Re: Re: Re: RE: CNC upgrade