Re: [CAD_CAM_EDM_DRO] My CNC Project

Bill,

I found some slabs of aluminum, 9 x 12 x 1". Helps a lot. How did you
drill the surface plate?

Alan KM6VV

wanliker@... wrote:

> <snip>
> tunneled thru the column adapter block to put the Y axis stepper in the back,
> and will mount the X axis stepper on the left end. I mounted the mill on a
> cheap Chinese surface plate. Makes for a heavy, stable setup. The mill
> conversion was based on what Ron Ginger did to his mill. Thank you Ron.
> bill